AirTAC HFP Series
HFP Series Air gripper
- A structure of lever type gripping is designed to reduce the cost under the premise of accuracy.
- A sheet metal is installed between the finger and body to reduce abrasion and extend the service life.
- The contact area between finger and body is enlarged to reduce shaking and enhance the gripping accuracy.
- The finger clamps when the piston rod pushes out and stretches when the piston rod retracts. The gripping force is 20%~30% greater than the tensile force.
- Can be mounted from three directions.
- Magnet is included in the standard configuration.
Specification
Installation & Usage
Ordering Code
Symbol
Download
-
AirTAC HFTP Series: Mechanical Parallel Air Gripper - HFTP32N
Type:Mechanical Parallel Air Gripper,Acting type:Single acting, normally opened,Bore size:Φ32mm,Finger/mounting type:Thru-hole mounting typeProduct Features:1. AirTAC pneumatic air gripper (air finger); magnet included as standard for position sensing (sensor switch ordered separately).2. Air to be filtered by 40μm filter element; repeatability typically ±0.01~0.02mm.3. Can be mounted from multiple directions (surface / tail / front); choose finger/mounting type per application.4. Equip an anti-dropping device and a flow control valve for safe, speed-adjustable gripping.
$211.20
-
AirTAC HFTP Series: Mechanical Parallel Air Gripper - HFTP32
Type:Mechanical Parallel Air Gripper,Acting type:Single acting, normally opened,Bore size:Φ32mm,Finger/mounting type:Standard typeProduct Features:1. AirTAC pneumatic air gripper (air finger); magnet included as standard for position sensing (sensor switch ordered separately).2. Air to be filtered by 40μm filter element; repeatability typically ±0.01~0.02mm.3. Can be mounted from multiple directions (surface / tail / front); choose finger/mounting type per application.4. Equip an anti-dropping device and a flow control valve for safe, speed-adjustable gripping.
$211.20
-
AirTAC HFTP Series: Mechanical Parallel Air Gripper - HFTP25N
Type:Mechanical Parallel Air Gripper,Acting type:Single acting, normally opened,Bore size:Φ25mm,Finger/mounting type:Thru-hole mounting typeProduct Features:1. AirTAC pneumatic air gripper (air finger); magnet included as standard for position sensing (sensor switch ordered separately).2. Air to be filtered by 40μm filter element; repeatability typically ±0.01~0.02mm.3. Can be mounted from multiple directions (surface / tail / front); choose finger/mounting type per application.4. Equip an anti-dropping device and a flow control valve for safe, speed-adjustable gripping.
$158.40
-
AirTAC HFTP Series: Mechanical Parallel Air Gripper - HFTP25
Type:Mechanical Parallel Air Gripper,Acting type:Single acting, normally opened,Bore size:Φ25mm,Finger/mounting type:Standard typeProduct Features:1. AirTAC pneumatic air gripper (air finger); magnet included as standard for position sensing (sensor switch ordered separately).2. Air to be filtered by 40μm filter element; repeatability typically ±0.01~0.02mm.3. Can be mounted from multiple directions (surface / tail / front); choose finger/mounting type per application.4. Equip an anti-dropping device and a flow control valve for safe, speed-adjustable gripping.
$158.40
-
AirTAC HFTP Series: Mechanical Parallel Air Gripper - HFTP20N
Type:Mechanical Parallel Air Gripper,Acting type:Single acting, normally opened,Bore size:Φ20mm,Finger/mounting type:Thru-hole mounting typeProduct Features:1. AirTAC pneumatic air gripper (air finger); magnet included as standard for position sensing (sensor switch ordered separately).2. Air to be filtered by 40μm filter element; repeatability typically ±0.01~0.02mm.3. Can be mounted from multiple directions (surface / tail / front); choose finger/mounting type per application.4. Equip an anti-dropping device and a flow control valve for safe, speed-adjustable gripping.
$127.20
-
AirTAC HFTP Series: Mechanical Parallel Air Gripper - HFTP20
Type:Mechanical Parallel Air Gripper,Acting type:Single acting, normally opened,Bore size:Φ20mm,Finger/mounting type:Standard typeProduct Features:1. AirTAC pneumatic air gripper (air finger); magnet included as standard for position sensing (sensor switch ordered separately).2. Air to be filtered by 40μm filter element; repeatability typically ±0.01~0.02mm.3. Can be mounted from multiple directions (surface / tail / front); choose finger/mounting type per application.4. Equip an anti-dropping device and a flow control valve for safe, speed-adjustable gripping.
$127.20
-
AirTAC HFTP Series: Mechanical Parallel Air Gripper - HFTP16N
Type:Mechanical Parallel Air Gripper,Acting type:Single acting, normally opened,Bore size:Φ16mm,Finger/mounting type:Thru-hole mounting typeProduct Features:1. AirTAC pneumatic air gripper (air finger); magnet included as standard for position sensing (sensor switch ordered separately).2. Air to be filtered by 40μm filter element; repeatability typically ±0.01~0.02mm.3. Can be mounted from multiple directions (surface / tail / front); choose finger/mounting type per application.4. Equip an anti-dropping device and a flow control valve for safe, speed-adjustable gripping.
$112.80
-
AirTAC HFTP Series: Mechanical Parallel Air Gripper - HFTP16
Type:Mechanical Parallel Air Gripper,Acting type:Single acting, normally opened,Bore size:Φ16mm,Finger/mounting type:Standard typeProduct Features:1. AirTAC pneumatic air gripper (air finger); magnet included as standard for position sensing (sensor switch ordered separately).2. Air to be filtered by 40μm filter element; repeatability typically ±0.01~0.02mm.3. Can be mounted from multiple directions (surface / tail / front); choose finger/mounting type per application.4. Equip an anti-dropping device and a flow control valve for safe, speed-adjustable gripping.
$112.80
-
AirTAC HFTP Series: Mechanical Parallel Air Gripper - HFTP10N
Type:Mechanical Parallel Air Gripper,Acting type:Single acting, normally opened,Bore size:Φ10mm,Finger/mounting type:Thru-hole mounting typeProduct Features:1. AirTAC pneumatic air gripper (air finger); magnet included as standard for position sensing (sensor switch ordered separately).2. Air to be filtered by 40μm filter element; repeatability typically ±0.01~0.02mm.3. Can be mounted from multiple directions (surface / tail / front); choose finger/mounting type per application.4. Equip an anti-dropping device and a flow control valve for safe, speed-adjustable gripping.
$98.40
-
AirTAC HFTP Series: Mechanical Parallel Air Gripper - HFTP10
Type:Mechanical Parallel Air Gripper,Acting type:Single acting, normally opened,Bore size:Φ10mm,Finger/mounting type:Standard typeProduct Features:1. AirTAC pneumatic air gripper (air finger); magnet included as standard for position sensing (sensor switch ordered separately).2. Air to be filtered by 40μm filter element; repeatability typically ±0.01~0.02mm.3. Can be mounted from multiple directions (surface / tail / front); choose finger/mounting type per application.4. Equip an anti-dropping device and a flow control valve for safe, speed-adjustable gripping.
$98.40
-
AirTAC HFP Series: Mechanical Parallel Air Gripper - HFP32N
Type:Mechanical Parallel Air Gripper,Acting type:Double acting,Bore size:Φ32mm,Finger/mounting type:Thru-hole mounting typeProduct Features:1. AirTAC pneumatic air gripper (air finger); magnet included as standard for position sensing (sensor switch ordered separately).2. Air to be filtered by 40μm filter element; repeatability typically ±0.01~0.02mm.3. Can be mounted from multiple directions (surface / tail / front); choose finger/mounting type per application.4. Equip an anti-dropping device and a flow control valve for safe, speed-adjustable gripping.
$211.20
-
AirTAC HFP Series: Mechanical Parallel Air Gripper - HFP32
Type:Mechanical Parallel Air Gripper,Acting type:Double acting,Bore size:Φ32mm,Finger/mounting type:Standard typeProduct Features:1. AirTAC pneumatic air gripper (air finger); magnet included as standard for position sensing (sensor switch ordered separately).2. Air to be filtered by 40μm filter element; repeatability typically ±0.01~0.02mm.3. Can be mounted from multiple directions (surface / tail / front); choose finger/mounting type per application.4. Equip an anti-dropping device and a flow control valve for safe, speed-adjustable gripping.
$211.20
-
AirTAC HFP Series: Mechanical Parallel Air Gripper - HFP25N
Type:Mechanical Parallel Air Gripper,Acting type:Double acting,Bore size:Φ25mm,Finger/mounting type:Thru-hole mounting typeProduct Features:1. AirTAC pneumatic air gripper (air finger); magnet included as standard for position sensing (sensor switch ordered separately).2. Air to be filtered by 40μm filter element; repeatability typically ±0.01~0.02mm.3. Can be mounted from multiple directions (surface / tail / front); choose finger/mounting type per application.4. Equip an anti-dropping device and a flow control valve for safe, speed-adjustable gripping.
$158.40
-
AirTAC HFP Series: Mechanical Parallel Air Gripper - HFP25
Type:Mechanical Parallel Air Gripper,Acting type:Double acting,Bore size:Φ25mm,Finger/mounting type:Standard typeProduct Features:1. AirTAC pneumatic air gripper (air finger); magnet included as standard for position sensing (sensor switch ordered separately).2. Air to be filtered by 40μm filter element; repeatability typically ±0.01~0.02mm.3. Can be mounted from multiple directions (surface / tail / front); choose finger/mounting type per application.4. Equip an anti-dropping device and a flow control valve for safe, speed-adjustable gripping.
$158.40
-
AirTAC HFP Series: Mechanical Parallel Air Gripper - HFP20N
Type:Mechanical Parallel Air Gripper,Acting type:Double acting,Bore size:Φ20mm,Finger/mounting type:Thru-hole mounting typeProduct Features:1. AirTAC pneumatic air gripper (air finger); magnet included as standard for position sensing (sensor switch ordered separately).2. Air to be filtered by 40μm filter element; repeatability typically ±0.01~0.02mm.3. Can be mounted from multiple directions (surface / tail / front); choose finger/mounting type per application.4. Equip an anti-dropping device and a flow control valve for safe, speed-adjustable gripping.
$127.20
-
AirTAC HFP Series: Mechanical Parallel Air Gripper - HFP20
Type:Mechanical Parallel Air Gripper,Acting type:Double acting,Bore size:Φ20mm,Finger/mounting type:Standard typeProduct Features:1. AirTAC pneumatic air gripper (air finger); magnet included as standard for position sensing (sensor switch ordered separately).2. Air to be filtered by 40μm filter element; repeatability typically ±0.01~0.02mm.3. Can be mounted from multiple directions (surface / tail / front); choose finger/mounting type per application.4. Equip an anti-dropping device and a flow control valve for safe, speed-adjustable gripping.
$127.20
-
AirTAC HFP Series: Mechanical Parallel Air Gripper - HFP16N
Type:Mechanical Parallel Air Gripper,Acting type:Double acting,Bore size:Φ16mm,Finger/mounting type:Thru-hole mounting typeProduct Features:1. AirTAC pneumatic air gripper (air finger); magnet included as standard for position sensing (sensor switch ordered separately).2. Air to be filtered by 40μm filter element; repeatability typically ±0.01~0.02mm.3. Can be mounted from multiple directions (surface / tail / front); choose finger/mounting type per application.4. Equip an anti-dropping device and a flow control valve for safe, speed-adjustable gripping.
$112.80
-
AirTAC HFP Series: Mechanical Parallel Air Gripper - HFP16
Type:Mechanical Parallel Air Gripper,Acting type:Double acting,Bore size:Φ16mm,Finger/mounting type:Standard typeProduct Features:1. AirTAC pneumatic air gripper (air finger); magnet included as standard for position sensing (sensor switch ordered separately).2. Air to be filtered by 40μm filter element; repeatability typically ±0.01~0.02mm.3. Can be mounted from multiple directions (surface / tail / front); choose finger/mounting type per application.4. Equip an anti-dropping device and a flow control valve for safe, speed-adjustable gripping.
$112.80
-
AirTAC HFP Series: Mechanical Parallel Air Gripper - HFP10N
Type:Mechanical Parallel Air Gripper,Acting type:Double acting,Bore size:Φ10mm,Finger/mounting type:Thru-hole mounting typeProduct Features:1. AirTAC pneumatic air gripper (air finger); magnet included as standard for position sensing (sensor switch ordered separately).2. Air to be filtered by 40μm filter element; repeatability typically ±0.01~0.02mm.3. Can be mounted from multiple directions (surface / tail / front); choose finger/mounting type per application.4. Equip an anti-dropping device and a flow control valve for safe, speed-adjustable gripping.
$98.40
-
AirTAC HFP Series: Mechanical Parallel Air Gripper - HFP10
Type:Mechanical Parallel Air Gripper,Acting type:Double acting,Bore size:Φ10mm,Finger/mounting type:Standard typeProduct Features:1. AirTAC pneumatic air gripper (air finger); magnet included as standard for position sensing (sensor switch ordered separately).2. Air to be filtered by 40μm filter element; repeatability typically ±0.01~0.02mm.3. Can be mounted from multiple directions (surface / tail / front); choose finger/mounting type per application.4. Equip an anti-dropping device and a flow control valve for safe, speed-adjustable gripping.
$98.40
