AirTAC MCK Series
MCK Series Clamp cylinder
- It suits for workshops that make automation welding.
- There is a scraping dust ring in front cover, and it is firm and durable that can avoid dust and splashed welding slag breaking cylinders. It is more reliable than dust helmet.
- It fits the working environment where has strong magnetic field, if it uses the sensor switch which is with strong magnet and anti-strong magnetic field.
- Inlet interface are optional on three sides; buffer adjustment and speed limit adjustment are built-in.
- Various types of sensor switches are available.
Specification
Installation & Usage
Ordering Code
Symbol
Download
| Bore size (mm) | 40 | 50 | 63 | 80 |
|---|---|---|---|---|
| Acting type | Double acting | |||
| Fluid | Air (to be filtered by 40μm filter element) | |||
| Operating pressure | 0.15~1.0MPa (22~145psi) | |||
| Proof pressure | 1.5MPa (215psi) | |||
| Temperature | -20~70℃ | |||
| Speed range | 50~500mm/s | |||
| Cushion type | Variable cushion for back cover or front cover (optional) | |||
| Speed controlled valve | Standard setting for covers | |||
| Lubrication | Not required | |||
| Installation type | Double hinged-supports | |||
| Port size [Note1] | 1/4" | 3/8" | ||
[Note1] PT thread, G thread are available.
- In normal situation such as: edge packing, installation, jig test...and so on. Standard cylinder is suggested.
- In case of high-magnetic field generated by welding in the vicinity, anti-magnetic welding clamp cylinder shall be used and corresponding anti-magnetic sensor switch shall be matched.
- Before cylinder connecting, the dust must be eliminated to avoid it entering in the cylinder.
- The medium used by cylinder shall be filtered to 40μm or below.
- Under high temperature environment, the cylinder of high-temperature resistance shall be selected. Anti-freezing measure shall be adopted under low temperature environment to prevent the water freezing in cylinder.
- If cylinder is not used for a long time, please advert the surface to get rusty. Inlet and outlet ports should be have anti-dust caps and also spread the oil to avoid getting rusty on piston rod.
-
AirTAC MCKA Series: Welding Clamp Cylinder - MCKA50X150SYG
Type:Welding clamp cylinder (double acting),Hinge model:Hinge model A,Bore size:Φ50mm,Stroke:150mm,Magnet:With magnet,Port/cushion:Three-groups air port (variable cushion, front & back),Y-knuckle:With Y knuckle (with M6 thread hole),Port thread:G threadProduct Features:1. AirTAC MCK welding clamp cylinder (double acting) — suits automation-welding workshops.2. Scraping dust ring in front cover; firm and durable, resists welding-slag breaking the cylinder; double hinged-support mount.3. Variable cushion for covers; inlet interface optional on three sides; buffer and speed-limit adjustment built-in.4. Hinge model A / B; optional Y-knuckle; works in strong magnetic fields (use high-magnet sensor switch).
$106.00
-
AirTAC MCKA Series: Welding Clamp Cylinder - MCKA50X150SYT
Type:Welding clamp cylinder (double acting),Hinge model:Hinge model A,Bore size:Φ50mm,Stroke:150mm,Magnet:With magnet,Port/cushion:Three-groups air port (variable cushion, front & back),Y-knuckle:With Y knuckle (with M6 thread hole),Port thread:NPT threadProduct Features:1. AirTAC MCK welding clamp cylinder (double acting) — suits automation-welding workshops.2. Scraping dust ring in front cover; firm and durable, resists welding-slag breaking the cylinder; double hinged-support mount.3. Variable cushion for covers; inlet interface optional on three sides; buffer and speed-limit adjustment built-in.4. Hinge model A / B; optional Y-knuckle; works in strong magnetic fields (use high-magnet sensor switch).
$106.00
-
AirTAC MCKA Series: Welding Clamp Cylinder - MCKA50X150SY
Type:Welding clamp cylinder (double acting),Hinge model:Hinge model A,Bore size:Φ50mm,Stroke:150mm,Magnet:With magnet,Port/cushion:Three-groups air port (variable cushion, front & back),Y-knuckle:With Y knuckle (with M6 thread hole),Port thread:PT threadProduct Features:1. AirTAC MCK welding clamp cylinder (double acting) — suits automation-welding workshops.2. Scraping dust ring in front cover; firm and durable, resists welding-slag breaking the cylinder; double hinged-support mount.3. Variable cushion for covers; inlet interface optional on three sides; buffer and speed-limit adjustment built-in.4. Hinge model A / B; optional Y-knuckle; works in strong magnetic fields (use high-magnet sensor switch).
$106.00
-
AirTAC MCKA Series: Welding Clamp Cylinder - MCKA50X150SYWG
Type:Welding clamp cylinder (double acting),Hinge model:Hinge model A,Bore size:Φ50mm,Stroke:150mm,Magnet:With magnet,Port/cushion:Three-groups air port (variable cushion, front & back),Y-knuckle:With Y knuckle (no M6 thread hole),Port thread:G threadProduct Features:1. AirTAC MCK welding clamp cylinder (double acting) — suits automation-welding workshops.2. Scraping dust ring in front cover; firm and durable, resists welding-slag breaking the cylinder; double hinged-support mount.3. Variable cushion for covers; inlet interface optional on three sides; buffer and speed-limit adjustment built-in.4. Hinge model A / B; optional Y-knuckle; works in strong magnetic fields (use high-magnet sensor switch).
$106.00
-
AirTAC MCKA Series: Welding Clamp Cylinder - MCKA50X150SYWT
Type:Welding clamp cylinder (double acting),Hinge model:Hinge model A,Bore size:Φ50mm,Stroke:150mm,Magnet:With magnet,Port/cushion:Three-groups air port (variable cushion, front & back),Y-knuckle:With Y knuckle (no M6 thread hole),Port thread:NPT threadProduct Features:1. AirTAC MCK welding clamp cylinder (double acting) — suits automation-welding workshops.2. Scraping dust ring in front cover; firm and durable, resists welding-slag breaking the cylinder; double hinged-support mount.3. Variable cushion for covers; inlet interface optional on three sides; buffer and speed-limit adjustment built-in.4. Hinge model A / B; optional Y-knuckle; works in strong magnetic fields (use high-magnet sensor switch).
$106.00
-
AirTAC MCKA Series: Welding Clamp Cylinder - MCKA50X150SYW
Type:Welding clamp cylinder (double acting),Hinge model:Hinge model A,Bore size:Φ50mm,Stroke:150mm,Magnet:With magnet,Port/cushion:Three-groups air port (variable cushion, front & back),Y-knuckle:With Y knuckle (no M6 thread hole),Port thread:PT threadProduct Features:1. AirTAC MCK welding clamp cylinder (double acting) — suits automation-welding workshops.2. Scraping dust ring in front cover; firm and durable, resists welding-slag breaking the cylinder; double hinged-support mount.3. Variable cushion for covers; inlet interface optional on three sides; buffer and speed-limit adjustment built-in.4. Hinge model A / B; optional Y-knuckle; works in strong magnetic fields (use high-magnet sensor switch).
$106.00
-
AirTAC MCKA Series: Welding Clamp Cylinder - MCKA50X150YG
Type:Welding clamp cylinder (double acting),Hinge model:Hinge model A,Bore size:Φ50mm,Stroke:150mm,Magnet:Without magnet,Port/cushion:Three-groups air port (variable cushion, front & back),Y-knuckle:With Y knuckle (with M6 thread hole),Port thread:G threadProduct Features:1. AirTAC MCK welding clamp cylinder (double acting) — suits automation-welding workshops.2. Scraping dust ring in front cover; firm and durable, resists welding-slag breaking the cylinder; double hinged-support mount.3. Variable cushion for covers; inlet interface optional on three sides; buffer and speed-limit adjustment built-in.4. Hinge model A / B; optional Y-knuckle; works in strong magnetic fields (use high-magnet sensor switch).
$101.00
-
AirTAC MCKA Series: Welding Clamp Cylinder - MCKA50X150YT
Type:Welding clamp cylinder (double acting),Hinge model:Hinge model A,Bore size:Φ50mm,Stroke:150mm,Magnet:Without magnet,Port/cushion:Three-groups air port (variable cushion, front & back),Y-knuckle:With Y knuckle (with M6 thread hole),Port thread:NPT threadProduct Features:1. AirTAC MCK welding clamp cylinder (double acting) — suits automation-welding workshops.2. Scraping dust ring in front cover; firm and durable, resists welding-slag breaking the cylinder; double hinged-support mount.3. Variable cushion for covers; inlet interface optional on three sides; buffer and speed-limit adjustment built-in.4. Hinge model A / B; optional Y-knuckle; works in strong magnetic fields (use high-magnet sensor switch).
$101.00
-
AirTAC MCKA Series: Welding Clamp Cylinder - MCKA50X150Y
Type:Welding clamp cylinder (double acting),Hinge model:Hinge model A,Bore size:Φ50mm,Stroke:150mm,Magnet:Without magnet,Port/cushion:Three-groups air port (variable cushion, front & back),Y-knuckle:With Y knuckle (with M6 thread hole),Port thread:PT threadProduct Features:1. AirTAC MCK welding clamp cylinder (double acting) — suits automation-welding workshops.2. Scraping dust ring in front cover; firm and durable, resists welding-slag breaking the cylinder; double hinged-support mount.3. Variable cushion for covers; inlet interface optional on three sides; buffer and speed-limit adjustment built-in.4. Hinge model A / B; optional Y-knuckle; works in strong magnetic fields (use high-magnet sensor switch).
$101.00
-
AirTAC MCKA Series: Welding Clamp Cylinder - MCKA50X150YWG
Type:Welding clamp cylinder (double acting),Hinge model:Hinge model A,Bore size:Φ50mm,Stroke:150mm,Magnet:Without magnet,Port/cushion:Three-groups air port (variable cushion, front & back),Y-knuckle:With Y knuckle (no M6 thread hole),Port thread:G threadProduct Features:1. AirTAC MCK welding clamp cylinder (double acting) — suits automation-welding workshops.2. Scraping dust ring in front cover; firm and durable, resists welding-slag breaking the cylinder; double hinged-support mount.3. Variable cushion for covers; inlet interface optional on three sides; buffer and speed-limit adjustment built-in.4. Hinge model A / B; optional Y-knuckle; works in strong magnetic fields (use high-magnet sensor switch).
$101.00
-
AirTAC MCKA Series: Welding Clamp Cylinder - MCKA50X150YWT
Type:Welding clamp cylinder (double acting),Hinge model:Hinge model A,Bore size:Φ50mm,Stroke:150mm,Magnet:Without magnet,Port/cushion:Three-groups air port (variable cushion, front & back),Y-knuckle:With Y knuckle (no M6 thread hole),Port thread:NPT threadProduct Features:1. AirTAC MCK welding clamp cylinder (double acting) — suits automation-welding workshops.2. Scraping dust ring in front cover; firm and durable, resists welding-slag breaking the cylinder; double hinged-support mount.3. Variable cushion for covers; inlet interface optional on three sides; buffer and speed-limit adjustment built-in.4. Hinge model A / B; optional Y-knuckle; works in strong magnetic fields (use high-magnet sensor switch).
$101.00
-
AirTAC MCKA Series: Welding Clamp Cylinder - MCKA50X150YW
Type:Welding clamp cylinder (double acting),Hinge model:Hinge model A,Bore size:Φ50mm,Stroke:150mm,Magnet:Without magnet,Port/cushion:Three-groups air port (variable cushion, front & back),Y-knuckle:With Y knuckle (no M6 thread hole),Port thread:PT threadProduct Features:1. AirTAC MCK welding clamp cylinder (double acting) — suits automation-welding workshops.2. Scraping dust ring in front cover; firm and durable, resists welding-slag breaking the cylinder; double hinged-support mount.3. Variable cushion for covers; inlet interface optional on three sides; buffer and speed-limit adjustment built-in.4. Hinge model A / B; optional Y-knuckle; works in strong magnetic fields (use high-magnet sensor switch).
$101.00
-
AirTAC MCKA Series: Welding Clamp Cylinder - MCKA50X50G
Type:Welding clamp cylinder (double acting),Hinge model:Hinge model A,Bore size:Φ50mm,Stroke:50mm,Magnet:Without magnet,Port/cushion:Three-groups air port (variable cushion, front & back),Y-knuckle:Without Y knuckle,Port thread:G threadProduct Features:1. AirTAC MCK welding clamp cylinder (double acting) — suits automation-welding workshops.2. Scraping dust ring in front cover; firm and durable, resists welding-slag breaking the cylinder; double hinged-support mount.3. Variable cushion for covers; inlet interface optional on three sides; buffer and speed-limit adjustment built-in.4. Hinge model A / B; optional Y-knuckle; works in strong magnetic fields (use high-magnet sensor switch).
$80.00
-
AirTAC MCKA Series: Welding Clamp Cylinder - MCKA50X50T
Type:Welding clamp cylinder (double acting),Hinge model:Hinge model A,Bore size:Φ50mm,Stroke:50mm,Magnet:Without magnet,Port/cushion:Three-groups air port (variable cushion, front & back),Y-knuckle:Without Y knuckle,Port thread:NPT threadProduct Features:1. AirTAC MCK welding clamp cylinder (double acting) — suits automation-welding workshops.2. Scraping dust ring in front cover; firm and durable, resists welding-slag breaking the cylinder; double hinged-support mount.3. Variable cushion for covers; inlet interface optional on three sides; buffer and speed-limit adjustment built-in.4. Hinge model A / B; optional Y-knuckle; works in strong magnetic fields (use high-magnet sensor switch).
$80.00
-
AirTAC MCKA Series: Welding Clamp Cylinder - MCKA50X50
Type:Welding clamp cylinder (double acting),Hinge model:Hinge model A,Bore size:Φ50mm,Stroke:50mm,Magnet:Without magnet,Port/cushion:Three-groups air port (variable cushion, front & back),Y-knuckle:Without Y knuckle,Port thread:PT threadProduct Features:1. AirTAC MCK welding clamp cylinder (double acting) — suits automation-welding workshops.2. Scraping dust ring in front cover; firm and durable, resists welding-slag breaking the cylinder; double hinged-support mount.3. Variable cushion for covers; inlet interface optional on three sides; buffer and speed-limit adjustment built-in.4. Hinge model A / B; optional Y-knuckle; works in strong magnetic fields (use high-magnet sensor switch).
$80.00
-
AirTAC MCKA Series: Welding Clamp Cylinder - MCKA50X50EG
Type:Welding clamp cylinder (double acting),Hinge model:Hinge model A,Bore size:Φ50mm,Stroke:50mm,Magnet:Without magnet,Port/cushion:Variable cushion (front & back cover),Y-knuckle:Without Y knuckle,Port thread:G threadProduct Features:1. AirTAC MCK welding clamp cylinder (double acting) — suits automation-welding workshops.2. Scraping dust ring in front cover; firm and durable, resists welding-slag breaking the cylinder; double hinged-support mount.3. Variable cushion for covers; inlet interface optional on three sides; buffer and speed-limit adjustment built-in.4. Hinge model A / B; optional Y-knuckle; works in strong magnetic fields (use high-magnet sensor switch).
$80.00
-
AirTAC MCKA Series: Welding Clamp Cylinder - MCKA50X50ET
Type:Welding clamp cylinder (double acting),Hinge model:Hinge model A,Bore size:Φ50mm,Stroke:50mm,Magnet:Without magnet,Port/cushion:Variable cushion (front & back cover),Y-knuckle:Without Y knuckle,Port thread:NPT threadProduct Features:1. AirTAC MCK welding clamp cylinder (double acting) — suits automation-welding workshops.2. Scraping dust ring in front cover; firm and durable, resists welding-slag breaking the cylinder; double hinged-support mount.3. Variable cushion for covers; inlet interface optional on three sides; buffer and speed-limit adjustment built-in.4. Hinge model A / B; optional Y-knuckle; works in strong magnetic fields (use high-magnet sensor switch).
$80.00
-
AirTAC MCKA Series: Welding Clamp Cylinder - MCKA50X50E
Type:Welding clamp cylinder (double acting),Hinge model:Hinge model A,Bore size:Φ50mm,Stroke:50mm,Magnet:Without magnet,Port/cushion:Variable cushion (front & back cover),Y-knuckle:Without Y knuckle,Port thread:PT threadProduct Features:1. AirTAC MCK welding clamp cylinder (double acting) — suits automation-welding workshops.2. Scraping dust ring in front cover; firm and durable, resists welding-slag breaking the cylinder; double hinged-support mount.3. Variable cushion for covers; inlet interface optional on three sides; buffer and speed-limit adjustment built-in.4. Hinge model A / B; optional Y-knuckle; works in strong magnetic fields (use high-magnet sensor switch).
$80.00
-
AirTAC MCKA Series: Welding Clamp Cylinder - MCKA50X50EYG
Type:Welding clamp cylinder (double acting),Hinge model:Hinge model A,Bore size:Φ50mm,Stroke:50mm,Magnet:Without magnet,Port/cushion:Variable cushion (front & back cover),Y-knuckle:With Y knuckle (with M6 thread hole),Port thread:G threadProduct Features:1. AirTAC MCK welding clamp cylinder (double acting) — suits automation-welding workshops.2. Scraping dust ring in front cover; firm and durable, resists welding-slag breaking the cylinder; double hinged-support mount.3. Variable cushion for covers; inlet interface optional on three sides; buffer and speed-limit adjustment built-in.4. Hinge model A / B; optional Y-knuckle; works in strong magnetic fields (use high-magnet sensor switch).
$94.00
-
AirTAC MCKA Series: Welding Clamp Cylinder - MCKA50X50EYT
Type:Welding clamp cylinder (double acting),Hinge model:Hinge model A,Bore size:Φ50mm,Stroke:50mm,Magnet:Without magnet,Port/cushion:Variable cushion (front & back cover),Y-knuckle:With Y knuckle (with M6 thread hole),Port thread:NPT threadProduct Features:1. AirTAC MCK welding clamp cylinder (double acting) — suits automation-welding workshops.2. Scraping dust ring in front cover; firm and durable, resists welding-slag breaking the cylinder; double hinged-support mount.3. Variable cushion for covers; inlet interface optional on three sides; buffer and speed-limit adjustment built-in.4. Hinge model A / B; optional Y-knuckle; works in strong magnetic fields (use high-magnet sensor switch).
$94.00
-
AirTAC MCKA Series: Welding Clamp Cylinder - MCKA50X50EY
Type:Welding clamp cylinder (double acting),Hinge model:Hinge model A,Bore size:Φ50mm,Stroke:50mm,Magnet:Without magnet,Port/cushion:Variable cushion (front & back cover),Y-knuckle:With Y knuckle (with M6 thread hole),Port thread:PT threadProduct Features:1. AirTAC MCK welding clamp cylinder (double acting) — suits automation-welding workshops.2. Scraping dust ring in front cover; firm and durable, resists welding-slag breaking the cylinder; double hinged-support mount.3. Variable cushion for covers; inlet interface optional on three sides; buffer and speed-limit adjustment built-in.4. Hinge model A / B; optional Y-knuckle; works in strong magnetic fields (use high-magnet sensor switch).
$94.00
-
AirTAC MCKA Series: Welding Clamp Cylinder - MCKA50X50EYWG
Type:Welding clamp cylinder (double acting),Hinge model:Hinge model A,Bore size:Φ50mm,Stroke:50mm,Magnet:Without magnet,Port/cushion:Variable cushion (front & back cover),Y-knuckle:With Y knuckle (no M6 thread hole),Port thread:G threadProduct Features:1. AirTAC MCK welding clamp cylinder (double acting) — suits automation-welding workshops.2. Scraping dust ring in front cover; firm and durable, resists welding-slag breaking the cylinder; double hinged-support mount.3. Variable cushion for covers; inlet interface optional on three sides; buffer and speed-limit adjustment built-in.4. Hinge model A / B; optional Y-knuckle; works in strong magnetic fields (use high-magnet sensor switch).
$94.00
-
AirTAC MCKA Series: Welding Clamp Cylinder - MCKA50X50EYWT
Type:Welding clamp cylinder (double acting),Hinge model:Hinge model A,Bore size:Φ50mm,Stroke:50mm,Magnet:Without magnet,Port/cushion:Variable cushion (front & back cover),Y-knuckle:With Y knuckle (no M6 thread hole),Port thread:NPT threadProduct Features:1. AirTAC MCK welding clamp cylinder (double acting) — suits automation-welding workshops.2. Scraping dust ring in front cover; firm and durable, resists welding-slag breaking the cylinder; double hinged-support mount.3. Variable cushion for covers; inlet interface optional on three sides; buffer and speed-limit adjustment built-in.4. Hinge model A / B; optional Y-knuckle; works in strong magnetic fields (use high-magnet sensor switch).
$94.00
-
AirTAC MCKA Series: Welding Clamp Cylinder - MCKA50X50EYW
Type:Welding clamp cylinder (double acting),Hinge model:Hinge model A,Bore size:Φ50mm,Stroke:50mm,Magnet:Without magnet,Port/cushion:Variable cushion (front & back cover),Y-knuckle:With Y knuckle (no M6 thread hole),Port thread:PT threadProduct Features:1. AirTAC MCK welding clamp cylinder (double acting) — suits automation-welding workshops.2. Scraping dust ring in front cover; firm and durable, resists welding-slag breaking the cylinder; double hinged-support mount.3. Variable cushion for covers; inlet interface optional on three sides; buffer and speed-limit adjustment built-in.4. Hinge model A / B; optional Y-knuckle; works in strong magnetic fields (use high-magnet sensor switch).
$94.00
