AirTAC MD Series
MD Series Cylinder
- Manufactured by our enterprise.
- There are several ways to fix the cylinder and it is convenient to install and use.
- Several cylinders can be assembled together to effectively save the installation space.
- The guide precision of piston rod is high and no additional lubricant is needed.
- Cylinders of various specifications are optional.
- The seal material with high temperature resistance is adopted to guarantee the normal operation of cylinder at 150℃(Option).
Specification
Installation & Usage
Ordering Code
Symbol
Download
| Bore size (mm) | 6 | 10 | 16 | 20 | 25 | 32 | |
|---|---|---|---|---|---|---|---|
| Acting type | MD/MDD/MDJ | Double acting | |||||
| MSD/MTD | Single acting | ||||||
| Fluid | Air (to be filtered by 40μm filter element) | ||||||
| Operating pressure | Double acting | 0.15~1.0MPa (22~145psi) | |||||
| Single acting | 0.2~1.0MPa (28~145psi) | ||||||
| Proof pressure | 1.5MPa (215psi) | ||||||
| Temperature ℃ | -20~70 | ||||||
| Speed range mm/s | Double acting: 30~500 Single acting: 50~500 | ||||||
| Stroke tolerance | +1.00 | ||||||
| Cushion type | Bumper | ||||||
| Port size [Note] | M5×0.8 | 1/8" | |||||
[Note1] PT thread, G thread are available.
Add) Refer to P365 for detail of sensor switch.
- When load changes in the work, the cylinder with abundant output capacity shall be selected.
- Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion;
- Necessary protection measure shall be taken in the environment with higher humidity, much dust or water drops, oil dust and welding dregs.
- Dirty substances in the pipe must be cleared away before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.
- The medium used by cylinder shall be filtered to 40μm or below.
- As both of the front cover and piston of the cylinder are short, typically too large stroke can not be selected.
- Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.
- The cylinder shall avoid the influence of side load in operation maintain the normal work of cylinder and extend the service life.
- If the cylinder is dismantled and stored for a long time, pay attention to conduct anti-rust treatment to the surface. Anti-dust caps shall be added in air inlet and outlet ports.
-
AirTAC MD Series: Multi-mount cylinder (double acting) - MD6X20G
Type:Multi-mount cylinder (double acting),Bore size:Φ6mm,Stroke:20mm,Magnet:Without magnet,Port thread:G threadProduct Features:1. AirTAC multi-mount (multi-solid) cylinder — several mounting methods, convenient to install; cylinders can be assembled side by side to save space.2. High piston-rod guide precision, no additional lubricant needed; bore 6~32mm, bumper cushion.3. Double acting; double-rod (MDD/MKD) and adjustable-stroke (MDJ/MKJ) and non-rotating (MK family) variants available.4. High-temperature seal option (0~150°C); magnet optional for position sensing.
$50.00
-
AirTAC MD Series: Multi-mount cylinder (double acting) - MD6X20T
Type:Multi-mount cylinder (double acting),Bore size:Φ6mm,Stroke:20mm,Magnet:Without magnet,Port thread:NPT threadProduct Features:1. AirTAC multi-mount (multi-solid) cylinder — several mounting methods, convenient to install; cylinders can be assembled side by side to save space.2. High piston-rod guide precision, no additional lubricant needed; bore 6~32mm, bumper cushion.3. Double acting; double-rod (MDD/MKD) and adjustable-stroke (MDJ/MKJ) and non-rotating (MK family) variants available.4. High-temperature seal option (0~150°C); magnet optional for position sensing.
$50.00
-
AirTAC MD Series: Multi-mount cylinder (double acting) - MD6X20
Type:Multi-mount cylinder (double acting),Bore size:Φ6mm,Stroke:20mm,Magnet:Without magnet,Port thread:PT threadProduct Features:1. AirTAC multi-mount (multi-solid) cylinder — several mounting methods, convenient to install; cylinders can be assembled side by side to save space.2. High piston-rod guide precision, no additional lubricant needed; bore 6~32mm, bumper cushion.3. Double acting; double-rod (MDD/MKD) and adjustable-stroke (MDJ/MKJ) and non-rotating (MK family) variants available.4. High-temperature seal option (0~150°C); magnet optional for position sensing.
$50.00
-
AirTAC MD Series: Multi-mount cylinder (double acting) - MD6X20SG
Type:Multi-mount cylinder (double acting),Bore size:Φ6mm,Stroke:20mm,Magnet:With magnet,Port thread:G threadProduct Features:1. AirTAC multi-mount (multi-solid) cylinder — several mounting methods, convenient to install; cylinders can be assembled side by side to save space.2. High piston-rod guide precision, no additional lubricant needed; bore 6~32mm, bumper cushion.3. Double acting; double-rod (MDD/MKD) and adjustable-stroke (MDJ/MKJ) and non-rotating (MK family) variants available.4. High-temperature seal option (0~150°C); magnet optional for position sensing.
$50.00
-
AirTAC MD Series: Multi-mount cylinder (double acting) - MD6X20ST
Type:Multi-mount cylinder (double acting),Bore size:Φ6mm,Stroke:20mm,Magnet:With magnet,Port thread:NPT threadProduct Features:1. AirTAC multi-mount (multi-solid) cylinder — several mounting methods, convenient to install; cylinders can be assembled side by side to save space.2. High piston-rod guide precision, no additional lubricant needed; bore 6~32mm, bumper cushion.3. Double acting; double-rod (MDD/MKD) and adjustable-stroke (MDJ/MKJ) and non-rotating (MK family) variants available.4. High-temperature seal option (0~150°C); magnet optional for position sensing.
$50.00
-
AirTAC MD Series: Multi-mount cylinder (double acting) - MD6X20S
Type:Multi-mount cylinder (double acting),Bore size:Φ6mm,Stroke:20mm,Magnet:With magnet,Port thread:PT threadProduct Features:1. AirTAC multi-mount (multi-solid) cylinder — several mounting methods, convenient to install; cylinders can be assembled side by side to save space.2. High piston-rod guide precision, no additional lubricant needed; bore 6~32mm, bumper cushion.3. Double acting; double-rod (MDD/MKD) and adjustable-stroke (MDJ/MKJ) and non-rotating (MK family) variants available.4. High-temperature seal option (0~150°C); magnet optional for position sensing.
$50.00
-
AirTAC MD Series: Multi-mount cylinder (double acting) - MD6X25G
Type:Multi-mount cylinder (double acting),Bore size:Φ6mm,Stroke:25mm,Magnet:Without magnet,Port thread:G threadProduct Features:1. AirTAC multi-mount (multi-solid) cylinder — several mounting methods, convenient to install; cylinders can be assembled side by side to save space.2. High piston-rod guide precision, no additional lubricant needed; bore 6~32mm, bumper cushion.3. Double acting; double-rod (MDD/MKD) and adjustable-stroke (MDJ/MKJ) and non-rotating (MK family) variants available.4. High-temperature seal option (0~150°C); magnet optional for position sensing.
$52.00
-
AirTAC MD Series: Multi-mount cylinder (double acting) - MD6X25T
Type:Multi-mount cylinder (double acting),Bore size:Φ6mm,Stroke:25mm,Magnet:Without magnet,Port thread:NPT threadProduct Features:1. AirTAC multi-mount (multi-solid) cylinder — several mounting methods, convenient to install; cylinders can be assembled side by side to save space.2. High piston-rod guide precision, no additional lubricant needed; bore 6~32mm, bumper cushion.3. Double acting; double-rod (MDD/MKD) and adjustable-stroke (MDJ/MKJ) and non-rotating (MK family) variants available.4. High-temperature seal option (0~150°C); magnet optional for position sensing.
$52.00
-
AirTAC MD Series: Multi-mount cylinder (double acting) - MD6X25
Type:Multi-mount cylinder (double acting),Bore size:Φ6mm,Stroke:25mm,Magnet:Without magnet,Port thread:PT threadProduct Features:1. AirTAC multi-mount (multi-solid) cylinder — several mounting methods, convenient to install; cylinders can be assembled side by side to save space.2. High piston-rod guide precision, no additional lubricant needed; bore 6~32mm, bumper cushion.3. Double acting; double-rod (MDD/MKD) and adjustable-stroke (MDJ/MKJ) and non-rotating (MK family) variants available.4. High-temperature seal option (0~150°C); magnet optional for position sensing.
$52.00
-
AirTAC MD Series: Multi-mount cylinder (double acting) - MD6X25SG
Type:Multi-mount cylinder (double acting),Bore size:Φ6mm,Stroke:25mm,Magnet:With magnet,Port thread:G threadProduct Features:1. AirTAC multi-mount (multi-solid) cylinder — several mounting methods, convenient to install; cylinders can be assembled side by side to save space.2. High piston-rod guide precision, no additional lubricant needed; bore 6~32mm, bumper cushion.3. Double acting; double-rod (MDD/MKD) and adjustable-stroke (MDJ/MKJ) and non-rotating (MK family) variants available.4. High-temperature seal option (0~150°C); magnet optional for position sensing.
$53.00
-
AirTAC MD Series: Multi-mount cylinder (double acting) - MD6X25ST
Type:Multi-mount cylinder (double acting),Bore size:Φ6mm,Stroke:25mm,Magnet:With magnet,Port thread:NPT threadProduct Features:1. AirTAC multi-mount (multi-solid) cylinder — several mounting methods, convenient to install; cylinders can be assembled side by side to save space.2. High piston-rod guide precision, no additional lubricant needed; bore 6~32mm, bumper cushion.3. Double acting; double-rod (MDD/MKD) and adjustable-stroke (MDJ/MKJ) and non-rotating (MK family) variants available.4. High-temperature seal option (0~150°C); magnet optional for position sensing.
$53.00
-
AirTAC MD Series: Multi-mount cylinder (double acting) - MD6X25S
Type:Multi-mount cylinder (double acting),Bore size:Φ6mm,Stroke:25mm,Magnet:With magnet,Port thread:PT threadProduct Features:1. AirTAC multi-mount (multi-solid) cylinder — several mounting methods, convenient to install; cylinders can be assembled side by side to save space.2. High piston-rod guide precision, no additional lubricant needed; bore 6~32mm, bumper cushion.3. Double acting; double-rod (MDD/MKD) and adjustable-stroke (MDJ/MKJ) and non-rotating (MK family) variants available.4. High-temperature seal option (0~150°C); magnet optional for position sensing.
$53.00
-
AirTAC MD Series: Multi-mount cylinder (double acting) - MD6X30G
Type:Multi-mount cylinder (double acting),Bore size:Φ6mm,Stroke:30mm,Magnet:Without magnet,Port thread:G threadProduct Features:1. AirTAC multi-mount (multi-solid) cylinder — several mounting methods, convenient to install; cylinders can be assembled side by side to save space.2. High piston-rod guide precision, no additional lubricant needed; bore 6~32mm, bumper cushion.3. Double acting; double-rod (MDD/MKD) and adjustable-stroke (MDJ/MKJ) and non-rotating (MK family) variants available.4. High-temperature seal option (0~150°C); magnet optional for position sensing.
$54.00
-
AirTAC MD Series: Multi-mount cylinder (double acting) - MD6X30T
Type:Multi-mount cylinder (double acting),Bore size:Φ6mm,Stroke:30mm,Magnet:Without magnet,Port thread:NPT threadProduct Features:1. AirTAC multi-mount (multi-solid) cylinder — several mounting methods, convenient to install; cylinders can be assembled side by side to save space.2. High piston-rod guide precision, no additional lubricant needed; bore 6~32mm, bumper cushion.3. Double acting; double-rod (MDD/MKD) and adjustable-stroke (MDJ/MKJ) and non-rotating (MK family) variants available.4. High-temperature seal option (0~150°C); magnet optional for position sensing.
$54.00
-
AirTAC MD Series: Multi-mount cylinder (double acting) - MD6X30
Type:Multi-mount cylinder (double acting),Bore size:Φ6mm,Stroke:30mm,Magnet:Without magnet,Port thread:PT threadProduct Features:1. AirTAC multi-mount (multi-solid) cylinder — several mounting methods, convenient to install; cylinders can be assembled side by side to save space.2. High piston-rod guide precision, no additional lubricant needed; bore 6~32mm, bumper cushion.3. Double acting; double-rod (MDD/MKD) and adjustable-stroke (MDJ/MKJ) and non-rotating (MK family) variants available.4. High-temperature seal option (0~150°C); magnet optional for position sensing.
$54.00
-
AirTAC MD Series: Multi-mount cylinder (double acting) - MD6X30SG
Type:Multi-mount cylinder (double acting),Bore size:Φ6mm,Stroke:30mm,Magnet:With magnet,Port thread:G threadProduct Features:1. AirTAC multi-mount (multi-solid) cylinder — several mounting methods, convenient to install; cylinders can be assembled side by side to save space.2. High piston-rod guide precision, no additional lubricant needed; bore 6~32mm, bumper cushion.3. Double acting; double-rod (MDD/MKD) and adjustable-stroke (MDJ/MKJ) and non-rotating (MK family) variants available.4. High-temperature seal option (0~150°C); magnet optional for position sensing.
$55.00
-
AirTAC MD Series: Multi-mount cylinder (double acting) - MD6X30ST
Type:Multi-mount cylinder (double acting),Bore size:Φ6mm,Stroke:30mm,Magnet:With magnet,Port thread:NPT threadProduct Features:1. AirTAC multi-mount (multi-solid) cylinder — several mounting methods, convenient to install; cylinders can be assembled side by side to save space.2. High piston-rod guide precision, no additional lubricant needed; bore 6~32mm, bumper cushion.3. Double acting; double-rod (MDD/MKD) and adjustable-stroke (MDJ/MKJ) and non-rotating (MK family) variants available.4. High-temperature seal option (0~150°C); magnet optional for position sensing.
$55.00
-
AirTAC MD Series: Multi-mount cylinder (double acting) - MD6X30S
Type:Multi-mount cylinder (double acting),Bore size:Φ6mm,Stroke:30mm,Magnet:With magnet,Port thread:PT threadProduct Features:1. AirTAC multi-mount (multi-solid) cylinder — several mounting methods, convenient to install; cylinders can be assembled side by side to save space.2. High piston-rod guide precision, no additional lubricant needed; bore 6~32mm, bumper cushion.3. Double acting; double-rod (MDD/MKD) and adjustable-stroke (MDJ/MKJ) and non-rotating (MK family) variants available.4. High-temperature seal option (0~150°C); magnet optional for position sensing.
$55.00
-
AirTAC MD Series: Multi-mount cylinder (double acting) - MD6X35G
Type:Multi-mount cylinder (double acting),Bore size:Φ6mm,Stroke:35mm,Magnet:Without magnet,Port thread:G threadProduct Features:1. AirTAC multi-mount (multi-solid) cylinder — several mounting methods, convenient to install; cylinders can be assembled side by side to save space.2. High piston-rod guide precision, no additional lubricant needed; bore 6~32mm, bumper cushion.3. Double acting; double-rod (MDD/MKD) and adjustable-stroke (MDJ/MKJ) and non-rotating (MK family) variants available.4. High-temperature seal option (0~150°C); magnet optional for position sensing.
$57.00
-
AirTAC MD Series: Multi-mount cylinder (double acting) - MD6X35T
Type:Multi-mount cylinder (double acting),Bore size:Φ6mm,Stroke:35mm,Magnet:Without magnet,Port thread:NPT threadProduct Features:1. AirTAC multi-mount (multi-solid) cylinder — several mounting methods, convenient to install; cylinders can be assembled side by side to save space.2. High piston-rod guide precision, no additional lubricant needed; bore 6~32mm, bumper cushion.3. Double acting; double-rod (MDD/MKD) and adjustable-stroke (MDJ/MKJ) and non-rotating (MK family) variants available.4. High-temperature seal option (0~150°C); magnet optional for position sensing.
$57.00
-
AirTAC MD Series: Multi-mount cylinder (double acting) - MD6X35
Type:Multi-mount cylinder (double acting),Bore size:Φ6mm,Stroke:35mm,Magnet:Without magnet,Port thread:PT threadProduct Features:1. AirTAC multi-mount (multi-solid) cylinder — several mounting methods, convenient to install; cylinders can be assembled side by side to save space.2. High piston-rod guide precision, no additional lubricant needed; bore 6~32mm, bumper cushion.3. Double acting; double-rod (MDD/MKD) and adjustable-stroke (MDJ/MKJ) and non-rotating (MK family) variants available.4. High-temperature seal option (0~150°C); magnet optional for position sensing.
$57.00
-
AirTAC MD Series: Multi-mount cylinder (double acting) - MD6X35SG
Type:Multi-mount cylinder (double acting),Bore size:Φ6mm,Stroke:35mm,Magnet:With magnet,Port thread:G threadProduct Features:1. AirTAC multi-mount (multi-solid) cylinder — several mounting methods, convenient to install; cylinders can be assembled side by side to save space.2. High piston-rod guide precision, no additional lubricant needed; bore 6~32mm, bumper cushion.3. Double acting; double-rod (MDD/MKD) and adjustable-stroke (MDJ/MKJ) and non-rotating (MK family) variants available.4. High-temperature seal option (0~150°C); magnet optional for position sensing.
$57.00
-
AirTAC MD Series: Multi-mount cylinder (double acting) - MD6X35ST
Type:Multi-mount cylinder (double acting),Bore size:Φ6mm,Stroke:35mm,Magnet:With magnet,Port thread:NPT threadProduct Features:1. AirTAC multi-mount (multi-solid) cylinder — several mounting methods, convenient to install; cylinders can be assembled side by side to save space.2. High piston-rod guide precision, no additional lubricant needed; bore 6~32mm, bumper cushion.3. Double acting; double-rod (MDD/MKD) and adjustable-stroke (MDJ/MKJ) and non-rotating (MK family) variants available.4. High-temperature seal option (0~150°C); magnet optional for position sensing.
$57.00
-
AirTAC MD Series: Multi-mount cylinder (double acting) - MD6X35S
Type:Multi-mount cylinder (double acting),Bore size:Φ6mm,Stroke:35mm,Magnet:With magnet,Port thread:PT threadProduct Features:1. AirTAC multi-mount (multi-solid) cylinder — several mounting methods, convenient to install; cylinders can be assembled side by side to save space.2. High piston-rod guide precision, no additional lubricant needed; bore 6~32mm, bumper cushion.3. Double acting; double-rod (MDD/MKD) and adjustable-stroke (MDJ/MKJ) and non-rotating (MK family) variants available.4. High-temperature seal option (0~150°C); magnet optional for position sensing.
$57.00
