AirTAC MG Series
JIS Cylinder MG,MGC Series
- JIS standard is implemented.
- Piston adopts heterogeneous two way seal structure. It has compact size and has the function of oil reservation.
- Front cover owns fixed anti-impact pad which can reduce the impact of direction-change of the cylinder.
- Front and back cover and stainless steel block adopt riveted rolling packed structure to form a reliable connection.
- The cylinder body has stainless steel pipes with high precision to produce high strength and corrosion resistance.
- There are cylinders and mounting accessories with several specifications for your choice.
Specification
Installation & Usage
Ordering Code
Symbol
Download
| Bore size (mm) | 20 | 25 | 32 | 40 | 50 | 63 | |
|---|---|---|---|---|---|---|---|
| Acting type | MSG/MTG | Single acting | - | ||||
| MG/MGD | Double acting | - | |||||
| MGC/MGCD | Double acting with cushion | ||||||
| Fluid | Air (to be filtered by 40μm filter element) | ||||||
| Operating pressure | Double acting | 0.15~1.0MPa (22~145psi) (1.5~10.0bar) | |||||
| Single acting | 0.2~1.0MPa (28~145psi) (2.0~10.0bar) | ||||||
| Proof pressure | 1.5MPa (215psi) (15bar) | ||||||
| Temperature ℃ | -20~70 | ||||||
| Speed range mm/s | Double acting: 30~800 Single acting: 50~800 | ||||||
| Stroke tolerance | 0~150: +1.00; >150: +1.50 | ||||||
| Cushion type | Variable cushion, Bumper | Variable cushion | |||||
| Port size [Note1] | Variable cushion | M5×0.8 | 1/8" | 1/4" | |||
| Bumper | 1/8" | - | |||||
[Note1] PT thread, G thread and NPT thread are available.
Add) Refer to P365 for detail of sensor switch.
- When load changes in the work, the cylinder with abundant output capacity shall be selected.
- Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.
- Necessary protection measure shall be taken in the environment with higher humidity, much dust or water drops, oil dust and welding dregs.
- Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.
- The medium used by cylinder shall be filtered to 40μm or below.
- Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.
- The cylinder shall be carried out test run without load before application. Prior to run, buffer shall be turned to the minimum and gradually released to avoid the damage on cylinder caused by excessive impact.
- To avoid side load, otherwise, piston rod will be bent and deformed and damage the thread at the end of the rod. Single-acting type can not be added in return.
- If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the surface. Anti-dust caps shall be added in air inlet and outlet ports. The front and back cover can not be dismantled, which shall be especially noticed.
-
AirTAC MGD Series: Mini Cylinder - MGD32X175LBT
Bore size:φ32mm,Stroke:175mm,Acting type:Double acting, double rod,Cushion:Bumper,Magnet:Without magnet,Mounting:LB type,Port thread:NPT threadProduct Features:1. JIS standard is implemented.2. Piston adopts heterogeneous two-way seal structure. It has compact size and function of oil reservation.3. Front cover owns fixed anti-impact pad which can reduce the impact of direction-change of the cylinder.4. Front and back cover and stainless steel block adopt riveted rolling packed structure to form a reliable connection.5. The cylinder body has stainless steel pipes with high precision to produce high strength and corrosion resistance.6. There are cylinders and mounting accessories with several specifications for your choice.
$110.00
-
AirTAC MGD Series: Mini Cylinder - MGD32X175FA
Bore size:φ32mm,Stroke:175mm,Acting type:Double acting, double rod,Cushion:Bumper,Magnet:Without magnet,Mounting:FA type,Port thread:PT threadProduct Features:1. JIS standard is implemented.2. Piston adopts heterogeneous two-way seal structure. It has compact size and function of oil reservation.3. Front cover owns fixed anti-impact pad which can reduce the impact of direction-change of the cylinder.4. Front and back cover and stainless steel block adopt riveted rolling packed structure to form a reliable connection.5. The cylinder body has stainless steel pipes with high precision to produce high strength and corrosion resistance.6. There are cylinders and mounting accessories with several specifications for your choice.
$115.00
-
AirTAC MGD Series: Mini Cylinder - MGD32X175FAG
Bore size:φ32mm,Stroke:175mm,Acting type:Double acting, double rod,Cushion:Bumper,Magnet:Without magnet,Mounting:FA type,Port thread:G threadProduct Features:1. JIS standard is implemented.2. Piston adopts heterogeneous two-way seal structure. It has compact size and function of oil reservation.3. Front cover owns fixed anti-impact pad which can reduce the impact of direction-change of the cylinder.4. Front and back cover and stainless steel block adopt riveted rolling packed structure to form a reliable connection.5. The cylinder body has stainless steel pipes with high precision to produce high strength and corrosion resistance.6. There are cylinders and mounting accessories with several specifications for your choice.
$115.00
-
AirTAC MGD Series: Mini Cylinder - MGD32X175FAT
Bore size:φ32mm,Stroke:175mm,Acting type:Double acting, double rod,Cushion:Bumper,Magnet:Without magnet,Mounting:FA type,Port thread:NPT threadProduct Features:1. JIS standard is implemented.2. Piston adopts heterogeneous two-way seal structure. It has compact size and function of oil reservation.3. Front cover owns fixed anti-impact pad which can reduce the impact of direction-change of the cylinder.4. Front and back cover and stainless steel block adopt riveted rolling packed structure to form a reliable connection.5. The cylinder body has stainless steel pipes with high precision to produce high strength and corrosion resistance.6. There are cylinders and mounting accessories with several specifications for your choice.
$115.00
-
AirTAC MGD Series: Mini Cylinder - MGD32X200
Bore size:φ32mm,Stroke:200mm,Acting type:Double acting, double rod,Cushion:Bumper,Magnet:Without magnet,Port thread:PT threadProduct Features:1. JIS standard is implemented.2. Piston adopts heterogeneous two-way seal structure. It has compact size and function of oil reservation.3. Front cover owns fixed anti-impact pad which can reduce the impact of direction-change of the cylinder.4. Front and back cover and stainless steel block adopt riveted rolling packed structure to form a reliable connection.5. The cylinder body has stainless steel pipes with high precision to produce high strength and corrosion resistance.6. There are cylinders and mounting accessories with several specifications for your choice.
$103.00
-
AirTAC MGD Series: Mini Cylinder - MGD32X200G
Bore size:φ32mm,Stroke:200mm,Acting type:Double acting, double rod,Cushion:Bumper,Magnet:Without magnet,Port thread:G threadProduct Features:1. JIS standard is implemented.2. Piston adopts heterogeneous two-way seal structure. It has compact size and function of oil reservation.3. Front cover owns fixed anti-impact pad which can reduce the impact of direction-change of the cylinder.4. Front and back cover and stainless steel block adopt riveted rolling packed structure to form a reliable connection.5. The cylinder body has stainless steel pipes with high precision to produce high strength and corrosion resistance.6. There are cylinders and mounting accessories with several specifications for your choice.
$103.00
-
AirTAC MGD Series: Mini Cylinder - MGD32X200T
Bore size:φ32mm,Stroke:200mm,Acting type:Double acting, double rod,Cushion:Bumper,Magnet:Without magnet,Port thread:NPT threadProduct Features:1. JIS standard is implemented.2. Piston adopts heterogeneous two-way seal structure. It has compact size and function of oil reservation.3. Front cover owns fixed anti-impact pad which can reduce the impact of direction-change of the cylinder.4. Front and back cover and stainless steel block adopt riveted rolling packed structure to form a reliable connection.5. The cylinder body has stainless steel pipes with high precision to produce high strength and corrosion resistance.6. There are cylinders and mounting accessories with several specifications for your choice.
$103.00
-
AirTAC MGD Series: Mini Cylinder - MGD32X200LB
Bore size:φ32mm,Stroke:200mm,Acting type:Double acting, double rod,Cushion:Bumper,Magnet:Without magnet,Mounting:LB type,Port thread:PT threadProduct Features:1. JIS standard is implemented.2. Piston adopts heterogeneous two-way seal structure. It has compact size and function of oil reservation.3. Front cover owns fixed anti-impact pad which can reduce the impact of direction-change of the cylinder.4. Front and back cover and stainless steel block adopt riveted rolling packed structure to form a reliable connection.5. The cylinder body has stainless steel pipes with high precision to produce high strength and corrosion resistance.6. There are cylinders and mounting accessories with several specifications for your choice.
$114.00
-
AirTAC MGD Series: Mini Cylinder - MGD32X200LBG
Bore size:φ32mm,Stroke:200mm,Acting type:Double acting, double rod,Cushion:Bumper,Magnet:Without magnet,Mounting:LB type,Port thread:G threadProduct Features:1. JIS standard is implemented.2. Piston adopts heterogeneous two-way seal structure. It has compact size and function of oil reservation.3. Front cover owns fixed anti-impact pad which can reduce the impact of direction-change of the cylinder.4. Front and back cover and stainless steel block adopt riveted rolling packed structure to form a reliable connection.5. The cylinder body has stainless steel pipes with high precision to produce high strength and corrosion resistance.6. There are cylinders and mounting accessories with several specifications for your choice.
$114.00
-
AirTAC MGD Series: Mini Cylinder - MGD32X200LBT
Bore size:φ32mm,Stroke:200mm,Acting type:Double acting, double rod,Cushion:Bumper,Magnet:Without magnet,Mounting:LB type,Port thread:NPT threadProduct Features:1. JIS standard is implemented.2. Piston adopts heterogeneous two-way seal structure. It has compact size and function of oil reservation.3. Front cover owns fixed anti-impact pad which can reduce the impact of direction-change of the cylinder.4. Front and back cover and stainless steel block adopt riveted rolling packed structure to form a reliable connection.5. The cylinder body has stainless steel pipes with high precision to produce high strength and corrosion resistance.6. There are cylinders and mounting accessories with several specifications for your choice.
$114.00
-
AirTAC MGD Series: Mini Cylinder - MGD32X200FA
Bore size:φ32mm,Stroke:200mm,Acting type:Double acting, double rod,Cushion:Bumper,Magnet:Without magnet,Mounting:FA type,Port thread:PT threadProduct Features:1. JIS standard is implemented.2. Piston adopts heterogeneous two-way seal structure. It has compact size and function of oil reservation.3. Front cover owns fixed anti-impact pad which can reduce the impact of direction-change of the cylinder.4. Front and back cover and stainless steel block adopt riveted rolling packed structure to form a reliable connection.5. The cylinder body has stainless steel pipes with high precision to produce high strength and corrosion resistance.6. There are cylinders and mounting accessories with several specifications for your choice.
$119.00
-
AirTAC MGD Series: Mini Cylinder - MGD32X200FAG
Bore size:φ32mm,Stroke:200mm,Acting type:Double acting, double rod,Cushion:Bumper,Magnet:Without magnet,Mounting:FA type,Port thread:G threadProduct Features:1. JIS standard is implemented.2. Piston adopts heterogeneous two-way seal structure. It has compact size and function of oil reservation.3. Front cover owns fixed anti-impact pad which can reduce the impact of direction-change of the cylinder.4. Front and back cover and stainless steel block adopt riveted rolling packed structure to form a reliable connection.5. The cylinder body has stainless steel pipes with high precision to produce high strength and corrosion resistance.6. There are cylinders and mounting accessories with several specifications for your choice.
$119.00
-
AirTAC MGD Series: Mini Cylinder - MGD32X200FAT
Bore size:φ32mm,Stroke:200mm,Acting type:Double acting, double rod,Cushion:Bumper,Magnet:Without magnet,Mounting:FA type,Port thread:NPT threadProduct Features:1. JIS standard is implemented.2. Piston adopts heterogeneous two-way seal structure. It has compact size and function of oil reservation.3. Front cover owns fixed anti-impact pad which can reduce the impact of direction-change of the cylinder.4. Front and back cover and stainless steel block adopt riveted rolling packed structure to form a reliable connection.5. The cylinder body has stainless steel pipes with high precision to produce high strength and corrosion resistance.6. There are cylinders and mounting accessories with several specifications for your choice.
$119.00
-
AirTAC MGD Series: Mini Cylinder - MGD32X250
Bore size:φ32mm,Stroke:250mm,Acting type:Double acting, double rod,Cushion:Bumper,Magnet:Without magnet,Port thread:PT threadProduct Features:1. JIS standard is implemented.2. Piston adopts heterogeneous two-way seal structure. It has compact size and function of oil reservation.3. Front cover owns fixed anti-impact pad which can reduce the impact of direction-change of the cylinder.4. Front and back cover and stainless steel block adopt riveted rolling packed structure to form a reliable connection.5. The cylinder body has stainless steel pipes with high precision to produce high strength and corrosion resistance.6. There are cylinders and mounting accessories with several specifications for your choice.
$111.00
-
AirTAC MGD Series: Mini Cylinder - MGD32X250G
Bore size:φ32mm,Stroke:250mm,Acting type:Double acting, double rod,Cushion:Bumper,Magnet:Without magnet,Port thread:G threadProduct Features:1. JIS standard is implemented.2. Piston adopts heterogeneous two-way seal structure. It has compact size and function of oil reservation.3. Front cover owns fixed anti-impact pad which can reduce the impact of direction-change of the cylinder.4. Front and back cover and stainless steel block adopt riveted rolling packed structure to form a reliable connection.5. The cylinder body has stainless steel pipes with high precision to produce high strength and corrosion resistance.6. There are cylinders and mounting accessories with several specifications for your choice.
$111.00
-
AirTAC MGD Series: Mini Cylinder - MGD32X250T
Bore size:φ32mm,Stroke:250mm,Acting type:Double acting, double rod,Cushion:Bumper,Magnet:Without magnet,Port thread:NPT threadProduct Features:1. JIS standard is implemented.2. Piston adopts heterogeneous two-way seal structure. It has compact size and function of oil reservation.3. Front cover owns fixed anti-impact pad which can reduce the impact of direction-change of the cylinder.4. Front and back cover and stainless steel block adopt riveted rolling packed structure to form a reliable connection.5. The cylinder body has stainless steel pipes with high precision to produce high strength and corrosion resistance.6. There are cylinders and mounting accessories with several specifications for your choice.
$111.00
-
AirTAC MGD Series: Mini Cylinder - MGD32X250LB
Bore size:φ32mm,Stroke:250mm,Acting type:Double acting, double rod,Cushion:Bumper,Magnet:Without magnet,Mounting:LB type,Port thread:PT threadProduct Features:1. JIS standard is implemented.2. Piston adopts heterogeneous two-way seal structure. It has compact size and function of oil reservation.3. Front cover owns fixed anti-impact pad which can reduce the impact of direction-change of the cylinder.4. Front and back cover and stainless steel block adopt riveted rolling packed structure to form a reliable connection.5. The cylinder body has stainless steel pipes with high precision to produce high strength and corrosion resistance.6. There are cylinders and mounting accessories with several specifications for your choice.
$122.00
-
AirTAC MGD Series: Mini Cylinder - MGD32X250LBG
Bore size:φ32mm,Stroke:250mm,Acting type:Double acting, double rod,Cushion:Bumper,Magnet:Without magnet,Mounting:LB type,Port thread:G threadProduct Features:1. JIS standard is implemented.2. Piston adopts heterogeneous two-way seal structure. It has compact size and function of oil reservation.3. Front cover owns fixed anti-impact pad which can reduce the impact of direction-change of the cylinder.4. Front and back cover and stainless steel block adopt riveted rolling packed structure to form a reliable connection.5. The cylinder body has stainless steel pipes with high precision to produce high strength and corrosion resistance.6. There are cylinders and mounting accessories with several specifications for your choice.
$122.00
-
AirTAC MGD Series: Mini Cylinder - MGD32X250LBT
Bore size:φ32mm,Stroke:250mm,Acting type:Double acting, double rod,Cushion:Bumper,Magnet:Without magnet,Mounting:LB type,Port thread:NPT threadProduct Features:1. JIS standard is implemented.2. Piston adopts heterogeneous two-way seal structure. It has compact size and function of oil reservation.3. Front cover owns fixed anti-impact pad which can reduce the impact of direction-change of the cylinder.4. Front and back cover and stainless steel block adopt riveted rolling packed structure to form a reliable connection.5. The cylinder body has stainless steel pipes with high precision to produce high strength and corrosion resistance.6. There are cylinders and mounting accessories with several specifications for your choice.
$122.00
-
AirTAC MGD Series: Mini Cylinder - MGD32X250FA
Bore size:φ32mm,Stroke:250mm,Acting type:Double acting, double rod,Cushion:Bumper,Magnet:Without magnet,Mounting:FA type,Port thread:PT threadProduct Features:1. JIS standard is implemented.2. Piston adopts heterogeneous two-way seal structure. It has compact size and function of oil reservation.3. Front cover owns fixed anti-impact pad which can reduce the impact of direction-change of the cylinder.4. Front and back cover and stainless steel block adopt riveted rolling packed structure to form a reliable connection.5. The cylinder body has stainless steel pipes with high precision to produce high strength and corrosion resistance.6. There are cylinders and mounting accessories with several specifications for your choice.
$127.00
-
AirTAC MGD Series: Mini Cylinder - MGD32X250FAG
Bore size:φ32mm,Stroke:250mm,Acting type:Double acting, double rod,Cushion:Bumper,Magnet:Without magnet,Mounting:FA type,Port thread:G threadProduct Features:1. JIS standard is implemented.2. Piston adopts heterogeneous two-way seal structure. It has compact size and function of oil reservation.3. Front cover owns fixed anti-impact pad which can reduce the impact of direction-change of the cylinder.4. Front and back cover and stainless steel block adopt riveted rolling packed structure to form a reliable connection.5. The cylinder body has stainless steel pipes with high precision to produce high strength and corrosion resistance.6. There are cylinders and mounting accessories with several specifications for your choice.
$127.00
-
AirTAC MGD Series: Mini Cylinder - MGD32X250FAT
Bore size:φ32mm,Stroke:250mm,Acting type:Double acting, double rod,Cushion:Bumper,Magnet:Without magnet,Mounting:FA type,Port thread:NPT threadProduct Features:1. JIS standard is implemented.2. Piston adopts heterogeneous two-way seal structure. It has compact size and function of oil reservation.3. Front cover owns fixed anti-impact pad which can reduce the impact of direction-change of the cylinder.4. Front and back cover and stainless steel block adopt riveted rolling packed structure to form a reliable connection.5. The cylinder body has stainless steel pipes with high precision to produce high strength and corrosion resistance.6. There are cylinders and mounting accessories with several specifications for your choice.
$127.00
-
AirTAC MGD Series: Mini Cylinder - MGD32X300
Bore size:φ32mm,Stroke:300mm,Acting type:Double acting, double rod,Cushion:Bumper,Magnet:Without magnet,Port thread:PT threadProduct Features:1. JIS standard is implemented.2. Piston adopts heterogeneous two-way seal structure. It has compact size and function of oil reservation.3. Front cover owns fixed anti-impact pad which can reduce the impact of direction-change of the cylinder.4. Front and back cover and stainless steel block adopt riveted rolling packed structure to form a reliable connection.5. The cylinder body has stainless steel pipes with high precision to produce high strength and corrosion resistance.6. There are cylinders and mounting accessories with several specifications for your choice.
$120.00
-
AirTAC MGD Series: Mini Cylinder - MGD32X300G
Bore size:φ32mm,Stroke:300mm,Acting type:Double acting, double rod,Cushion:Bumper,Magnet:Without magnet,Port thread:G threadProduct Features:1. JIS standard is implemented.2. Piston adopts heterogeneous two-way seal structure. It has compact size and function of oil reservation.3. Front cover owns fixed anti-impact pad which can reduce the impact of direction-change of the cylinder.4. Front and back cover and stainless steel block adopt riveted rolling packed structure to form a reliable connection.5. The cylinder body has stainless steel pipes with high precision to produce high strength and corrosion resistance.6. There are cylinders and mounting accessories with several specifications for your choice.
$120.00
