AirTAC SCF Series
SC Series Cylinder
- Standard cylinder manufactured by our enterprise.
- The seal of piston adopts heterogeneous two way seal structure. It’s dimension is tight and it has the function of grease reservation.
- It is tie rod cylinder. The cylinder barrel and front/rear cap is jointed by tie rods with high reliability.
- Compared with ISO15552 standard cylinder, SC series cylinder with the same bore size is shorter.
- The buffer adjustment of cylinder is smooth and steady.
- Cylinders and mounting accessories with several specifications are optional.
- The seal material with high temperature resistance is adopted to guarantee the normal operation of cylinder at 150℃.
Specification
Installation & Usage
Ordering Code
Symbol
Download
| Bore size (mm) | 32 | 40 | 50 | 63 | 80 | 100 | |
|---|---|---|---|---|---|---|---|
| Acting type | Double acting | ||||||
| Fluid | Air (to be filtered by 40μm filter element) | ||||||
| Mounting type | SC | Basic, FA, FB, CA, CB, LB, TC, TCM1 | |||||
| SCD, SCJ | Basic, FA, LB, TC, TCM1 | ||||||
| Operating pressure | 0.15~1.0MPa (22~145psi) (1.5~10.0bar) | ||||||
| Proof pressure | 1.5MPa (215psi) (15bar) | ||||||
| Temperature ℃ | -20~70 | ||||||
| Speed range mm/s | 30~800 | ||||||
| Stroke tolerance | 0~250: +1.00; 251~1000: +1.50; 1001~1500: +2.00 | ||||||
| Cushion type | Variable cushion | ||||||
| Adjustable cushion stroke | 21 | 28 | 29 | ||||
| Port size [Note1] | 1/8" | 1/4" | 3/8" | 1/2" | |||
[Note1] PT thread, G thread are available.
Add) Refer to P365 for detail of sensor switch.
- When load changes in the work, the cylinder with abundant output capacity shall be selected.
- Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.
- Necessary protection measure shall be taken in the environment with higher humidity, much dust or water drops, oil dust and welding dregs.
- Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.
- The medium used by cylinder shall be filtered to 40μm or below.
- Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.
- The cylinder shall be carried out test run without load before application. Prior to run, buffer shall be turned to the minimum and gradually released to avoid the damage on cylinder caused by excessive impact.
- The cylinder shall avoid the influence of side load in operation to maintain the normal work of cylinder and extend the service life.
- If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the surface. Anti-dust caps shall be added in air inlet and outlet ports.
-
AirTAC SCF Series: Cylinder with Valve - SCF80X175-06AIT
Type:Standard cylinder with built-in solenoid valve (double acting),Bore size:Φ80mm,Stroke:175mm,Magnet:Without magnet,Valve port:1/8",Voltage:AC220V,Electrical entry:Grommet,Port thread:NPT threadProduct Features:1. AirTAC SCF standard cylinder with built-in solenoid valve (double acting) — cylinder + 2-position valve integrated.2. Drives directly by energizing the valve coil; saves piping and a separate valve.3. Voltages: AC220V / DC24V / AC110V / AC24V / DC12V; terminal or grommet electrical entry.4. Valve port 1/8"~3/8"; SC-series cylinder body and mounting.
$275.00
-
AirTAC SCF Series: Cylinder with Valve - SCF80X175-06AI
Type:Standard cylinder with built-in solenoid valve (double acting),Bore size:Φ80mm,Stroke:175mm,Magnet:Without magnet,Valve port:1/8",Voltage:AC220V,Electrical entry:Grommet,Port thread:PT threadProduct Features:1. AirTAC SCF standard cylinder with built-in solenoid valve (double acting) — cylinder + 2-position valve integrated.2. Drives directly by energizing the valve coil; saves piping and a separate valve.3. Voltages: AC220V / DC24V / AC110V / AC24V / DC12V; terminal or grommet electrical entry.4. Valve port 1/8"~3/8"; SC-series cylinder body and mounting.
$275.00
-
AirTAC SCF Series: Cylinder with Valve - SCF80X175-06BG
Type:Standard cylinder with built-in solenoid valve (double acting),Bore size:Φ80mm,Stroke:175mm,Magnet:Without magnet,Valve port:1/8",Voltage:DC24V,Electrical entry:Terminal,Port thread:G threadProduct Features:1. AirTAC SCF standard cylinder with built-in solenoid valve (double acting) — cylinder + 2-position valve integrated.2. Drives directly by energizing the valve coil; saves piping and a separate valve.3. Voltages: AC220V / DC24V / AC110V / AC24V / DC12V; terminal or grommet electrical entry.4. Valve port 1/8"~3/8"; SC-series cylinder body and mounting.
$275.00
-
AirTAC SCF Series: Cylinder with Valve - SCF80X175-06BT
Type:Standard cylinder with built-in solenoid valve (double acting),Bore size:Φ80mm,Stroke:175mm,Magnet:Without magnet,Valve port:1/8",Voltage:DC24V,Electrical entry:Terminal,Port thread:NPT threadProduct Features:1. AirTAC SCF standard cylinder with built-in solenoid valve (double acting) — cylinder + 2-position valve integrated.2. Drives directly by energizing the valve coil; saves piping and a separate valve.3. Voltages: AC220V / DC24V / AC110V / AC24V / DC12V; terminal or grommet electrical entry.4. Valve port 1/8"~3/8"; SC-series cylinder body and mounting.
$275.00
-
AirTAC SCF Series: Cylinder with Valve - SCF80X175-06B
Type:Standard cylinder with built-in solenoid valve (double acting),Bore size:Φ80mm,Stroke:175mm,Magnet:Without magnet,Valve port:1/8",Voltage:DC24V,Electrical entry:Terminal,Port thread:PT threadProduct Features:1. AirTAC SCF standard cylinder with built-in solenoid valve (double acting) — cylinder + 2-position valve integrated.2. Drives directly by energizing the valve coil; saves piping and a separate valve.3. Voltages: AC220V / DC24V / AC110V / AC24V / DC12V; terminal or grommet electrical entry.4. Valve port 1/8"~3/8"; SC-series cylinder body and mounting.
$275.00
-
AirTAC SCF Series: Cylinder with Valve - SCF80X175-06BIG
Type:Standard cylinder with built-in solenoid valve (double acting),Bore size:Φ80mm,Stroke:175mm,Magnet:Without magnet,Valve port:1/8",Voltage:DC24V,Electrical entry:Grommet,Port thread:G threadProduct Features:1. AirTAC SCF standard cylinder with built-in solenoid valve (double acting) — cylinder + 2-position valve integrated.2. Drives directly by energizing the valve coil; saves piping and a separate valve.3. Voltages: AC220V / DC24V / AC110V / AC24V / DC12V; terminal or grommet electrical entry.4. Valve port 1/8"~3/8"; SC-series cylinder body and mounting.
$275.00
-
AirTAC SCF Series: Cylinder with Valve - SCF80X175-06BIT
Type:Standard cylinder with built-in solenoid valve (double acting),Bore size:Φ80mm,Stroke:175mm,Magnet:Without magnet,Valve port:1/8",Voltage:DC24V,Electrical entry:Grommet,Port thread:NPT threadProduct Features:1. AirTAC SCF standard cylinder with built-in solenoid valve (double acting) — cylinder + 2-position valve integrated.2. Drives directly by energizing the valve coil; saves piping and a separate valve.3. Voltages: AC220V / DC24V / AC110V / AC24V / DC12V; terminal or grommet electrical entry.4. Valve port 1/8"~3/8"; SC-series cylinder body and mounting.
$275.00
-
AirTAC SCF Series: Cylinder with Valve - SCF80X175-06BI
Type:Standard cylinder with built-in solenoid valve (double acting),Bore size:Φ80mm,Stroke:175mm,Magnet:Without magnet,Valve port:1/8",Voltage:DC24V,Electrical entry:Grommet,Port thread:PT threadProduct Features:1. AirTAC SCF standard cylinder with built-in solenoid valve (double acting) — cylinder + 2-position valve integrated.2. Drives directly by energizing the valve coil; saves piping and a separate valve.3. Voltages: AC220V / DC24V / AC110V / AC24V / DC12V; terminal or grommet electrical entry.4. Valve port 1/8"~3/8"; SC-series cylinder body and mounting.
$275.00
-
AirTAC SCF Series: Cylinder with Valve - SCF80X175-06CG
Type:Standard cylinder with built-in solenoid valve (double acting),Bore size:Φ80mm,Stroke:175mm,Magnet:Without magnet,Valve port:1/8",Voltage:AC110V,Electrical entry:Terminal,Port thread:G threadProduct Features:1. AirTAC SCF standard cylinder with built-in solenoid valve (double acting) — cylinder + 2-position valve integrated.2. Drives directly by energizing the valve coil; saves piping and a separate valve.3. Voltages: AC220V / DC24V / AC110V / AC24V / DC12V; terminal or grommet electrical entry.4. Valve port 1/8"~3/8"; SC-series cylinder body and mounting.
$275.00
-
AirTAC SCF Series: Cylinder with Valve - SCF80X175-06CT
Type:Standard cylinder with built-in solenoid valve (double acting),Bore size:Φ80mm,Stroke:175mm,Magnet:Without magnet,Valve port:1/8",Voltage:AC110V,Electrical entry:Terminal,Port thread:NPT threadProduct Features:1. AirTAC SCF standard cylinder with built-in solenoid valve (double acting) — cylinder + 2-position valve integrated.2. Drives directly by energizing the valve coil; saves piping and a separate valve.3. Voltages: AC220V / DC24V / AC110V / AC24V / DC12V; terminal or grommet electrical entry.4. Valve port 1/8"~3/8"; SC-series cylinder body and mounting.
$275.00
-
AirTAC SCF Series: Cylinder with Valve - SCF80X175-06C
Type:Standard cylinder with built-in solenoid valve (double acting),Bore size:Φ80mm,Stroke:175mm,Magnet:Without magnet,Valve port:1/8",Voltage:AC110V,Electrical entry:Terminal,Port thread:PT threadProduct Features:1. AirTAC SCF standard cylinder with built-in solenoid valve (double acting) — cylinder + 2-position valve integrated.2. Drives directly by energizing the valve coil; saves piping and a separate valve.3. Voltages: AC220V / DC24V / AC110V / AC24V / DC12V; terminal or grommet electrical entry.4. Valve port 1/8"~3/8"; SC-series cylinder body and mounting.
$275.00
-
AirTAC SCF Series: Cylinder with Valve - SCF80X175-06CIG
Type:Standard cylinder with built-in solenoid valve (double acting),Bore size:Φ80mm,Stroke:175mm,Magnet:Without magnet,Valve port:1/8",Voltage:AC110V,Electrical entry:Grommet,Port thread:G threadProduct Features:1. AirTAC SCF standard cylinder with built-in solenoid valve (double acting) — cylinder + 2-position valve integrated.2. Drives directly by energizing the valve coil; saves piping and a separate valve.3. Voltages: AC220V / DC24V / AC110V / AC24V / DC12V; terminal or grommet electrical entry.4. Valve port 1/8"~3/8"; SC-series cylinder body and mounting.
$275.00
-
AirTAC SCF Series: Cylinder with Valve - SCF80X175-06CIT
Type:Standard cylinder with built-in solenoid valve (double acting),Bore size:Φ80mm,Stroke:175mm,Magnet:Without magnet,Valve port:1/8",Voltage:AC110V,Electrical entry:Grommet,Port thread:NPT threadProduct Features:1. AirTAC SCF standard cylinder with built-in solenoid valve (double acting) — cylinder + 2-position valve integrated.2. Drives directly by energizing the valve coil; saves piping and a separate valve.3. Voltages: AC220V / DC24V / AC110V / AC24V / DC12V; terminal or grommet electrical entry.4. Valve port 1/8"~3/8"; SC-series cylinder body and mounting.
$275.00
-
AirTAC SCF Series: Cylinder with Valve - SCF80X175-06CI
Type:Standard cylinder with built-in solenoid valve (double acting),Bore size:Φ80mm,Stroke:175mm,Magnet:Without magnet,Valve port:1/8",Voltage:AC110V,Electrical entry:Grommet,Port thread:PT threadProduct Features:1. AirTAC SCF standard cylinder with built-in solenoid valve (double acting) — cylinder + 2-position valve integrated.2. Drives directly by energizing the valve coil; saves piping and a separate valve.3. Voltages: AC220V / DC24V / AC110V / AC24V / DC12V; terminal or grommet electrical entry.4. Valve port 1/8"~3/8"; SC-series cylinder body and mounting.
$275.00
-
AirTAC SCF Series: Cylinder with Valve - SCF80X175-06EG
Type:Standard cylinder with built-in solenoid valve (double acting),Bore size:Φ80mm,Stroke:175mm,Magnet:Without magnet,Valve port:1/8",Voltage:AC24V,Electrical entry:Terminal,Port thread:G threadProduct Features:1. AirTAC SCF standard cylinder with built-in solenoid valve (double acting) — cylinder + 2-position valve integrated.2. Drives directly by energizing the valve coil; saves piping and a separate valve.3. Voltages: AC220V / DC24V / AC110V / AC24V / DC12V; terminal or grommet electrical entry.4. Valve port 1/8"~3/8"; SC-series cylinder body and mounting.
$275.00
-
AirTAC SCF Series: Cylinder with Valve - SCF80X175-06ET
Type:Standard cylinder with built-in solenoid valve (double acting),Bore size:Φ80mm,Stroke:175mm,Magnet:Without magnet,Valve port:1/8",Voltage:AC24V,Electrical entry:Terminal,Port thread:NPT threadProduct Features:1. AirTAC SCF standard cylinder with built-in solenoid valve (double acting) — cylinder + 2-position valve integrated.2. Drives directly by energizing the valve coil; saves piping and a separate valve.3. Voltages: AC220V / DC24V / AC110V / AC24V / DC12V; terminal or grommet electrical entry.4. Valve port 1/8"~3/8"; SC-series cylinder body and mounting.
$275.00
-
AirTAC SCF Series: Cylinder with Valve - SCF80X175-06E
Type:Standard cylinder with built-in solenoid valve (double acting),Bore size:Φ80mm,Stroke:175mm,Magnet:Without magnet,Valve port:1/8",Voltage:AC24V,Electrical entry:Terminal,Port thread:PT threadProduct Features:1. AirTAC SCF standard cylinder with built-in solenoid valve (double acting) — cylinder + 2-position valve integrated.2. Drives directly by energizing the valve coil; saves piping and a separate valve.3. Voltages: AC220V / DC24V / AC110V / AC24V / DC12V; terminal or grommet electrical entry.4. Valve port 1/8"~3/8"; SC-series cylinder body and mounting.
$275.00
-
AirTAC SCF Series: Cylinder with Valve - SCF80X175-06EIG
Type:Standard cylinder with built-in solenoid valve (double acting),Bore size:Φ80mm,Stroke:175mm,Magnet:Without magnet,Valve port:1/8",Voltage:AC24V,Electrical entry:Grommet,Port thread:G threadProduct Features:1. AirTAC SCF standard cylinder with built-in solenoid valve (double acting) — cylinder + 2-position valve integrated.2. Drives directly by energizing the valve coil; saves piping and a separate valve.3. Voltages: AC220V / DC24V / AC110V / AC24V / DC12V; terminal or grommet electrical entry.4. Valve port 1/8"~3/8"; SC-series cylinder body and mounting.
$275.00
-
AirTAC SCF Series: Cylinder with Valve - SCF80X175-06EIT
Type:Standard cylinder with built-in solenoid valve (double acting),Bore size:Φ80mm,Stroke:175mm,Magnet:Without magnet,Valve port:1/8",Voltage:AC24V,Electrical entry:Grommet,Port thread:NPT threadProduct Features:1. AirTAC SCF standard cylinder with built-in solenoid valve (double acting) — cylinder + 2-position valve integrated.2. Drives directly by energizing the valve coil; saves piping and a separate valve.3. Voltages: AC220V / DC24V / AC110V / AC24V / DC12V; terminal or grommet electrical entry.4. Valve port 1/8"~3/8"; SC-series cylinder body and mounting.
$275.00
-
AirTAC SCF Series: Cylinder with Valve - SCF80X175-06EI
Type:Standard cylinder with built-in solenoid valve (double acting),Bore size:Φ80mm,Stroke:175mm,Magnet:Without magnet,Valve port:1/8",Voltage:AC24V,Electrical entry:Grommet,Port thread:PT threadProduct Features:1. AirTAC SCF standard cylinder with built-in solenoid valve (double acting) — cylinder + 2-position valve integrated.2. Drives directly by energizing the valve coil; saves piping and a separate valve.3. Voltages: AC220V / DC24V / AC110V / AC24V / DC12V; terminal or grommet electrical entry.4. Valve port 1/8"~3/8"; SC-series cylinder body and mounting.
$275.00
-
AirTAC SCF Series: Cylinder with Valve - SCF80X175-06FG
Type:Standard cylinder with built-in solenoid valve (double acting),Bore size:Φ80mm,Stroke:175mm,Magnet:Without magnet,Valve port:1/8",Voltage:DC12V,Electrical entry:Terminal,Port thread:G threadProduct Features:1. AirTAC SCF standard cylinder with built-in solenoid valve (double acting) — cylinder + 2-position valve integrated.2. Drives directly by energizing the valve coil; saves piping and a separate valve.3. Voltages: AC220V / DC24V / AC110V / AC24V / DC12V; terminal or grommet electrical entry.4. Valve port 1/8"~3/8"; SC-series cylinder body and mounting.
$275.00
-
AirTAC SCF Series: Cylinder with Valve - SCF80X175-06FT
Type:Standard cylinder with built-in solenoid valve (double acting),Bore size:Φ80mm,Stroke:175mm,Magnet:Without magnet,Valve port:1/8",Voltage:DC12V,Electrical entry:Terminal,Port thread:NPT threadProduct Features:1. AirTAC SCF standard cylinder with built-in solenoid valve (double acting) — cylinder + 2-position valve integrated.2. Drives directly by energizing the valve coil; saves piping and a separate valve.3. Voltages: AC220V / DC24V / AC110V / AC24V / DC12V; terminal or grommet electrical entry.4. Valve port 1/8"~3/8"; SC-series cylinder body and mounting.
$275.00
-
AirTAC SCF Series: Cylinder with Valve - SCF80X175-06F
Type:Standard cylinder with built-in solenoid valve (double acting),Bore size:Φ80mm,Stroke:175mm,Magnet:Without magnet,Valve port:1/8",Voltage:DC12V,Electrical entry:Terminal,Port thread:PT threadProduct Features:1. AirTAC SCF standard cylinder with built-in solenoid valve (double acting) — cylinder + 2-position valve integrated.2. Drives directly by energizing the valve coil; saves piping and a separate valve.3. Voltages: AC220V / DC24V / AC110V / AC24V / DC12V; terminal or grommet electrical entry.4. Valve port 1/8"~3/8"; SC-series cylinder body and mounting.
$275.00
-
AirTAC SCF Series: Cylinder with Valve - SCF80X175-06FIG
Type:Standard cylinder with built-in solenoid valve (double acting),Bore size:Φ80mm,Stroke:175mm,Magnet:Without magnet,Valve port:1/8",Voltage:DC12V,Electrical entry:Grommet,Port thread:G threadProduct Features:1. AirTAC SCF standard cylinder with built-in solenoid valve (double acting) — cylinder + 2-position valve integrated.2. Drives directly by energizing the valve coil; saves piping and a separate valve.3. Voltages: AC220V / DC24V / AC110V / AC24V / DC12V; terminal or grommet electrical entry.4. Valve port 1/8"~3/8"; SC-series cylinder body and mounting.
$275.00
