AirTAC SCLF Series
SC Series Cylinder
- Standard cylinder manufactured by our enterprise.
- The seal of piston adopts heterogeneous two way seal structure. It’s dimension is tight and it has the function of grease reservation.
- It is tie rod cylinder. The cylinder barrel and front/rear cap is jointed by tie rods with high reliability.
- Compared with ISO15552 standard cylinder, SC series cylinder with the same bore size is shorter.
- The buffer adjustment of cylinder is smooth and steady.
- Cylinders and mounting accessories with several specifications are optional.
- The seal material with high temperature resistance is adopted to guarantee the normal operation of cylinder at 150℃.
Specification
Installation & Usage
Ordering Code
Symbol
Download
| Bore size (mm) | 32 | 40 | 50 | 63 | 80 | 100 | |
|---|---|---|---|---|---|---|---|
| Acting type | Double acting | ||||||
| Fluid | Air (to be filtered by 40μm filter element) | ||||||
| Mounting type | SC | Basic, FA, FB, CA, CB, LB, TC, TCM1 | |||||
| SCD, SCJ | Basic, FA, LB, TC, TCM1 | ||||||
| Operating pressure | 0.15~1.0MPa (22~145psi) (1.5~10.0bar) | ||||||
| Proof pressure | 1.5MPa (215psi) (15bar) | ||||||
| Temperature ℃ | -20~70 | ||||||
| Speed range mm/s | 30~800 | ||||||
| Stroke tolerance | 0~250: +1.00; 251~1000: +1.50; 1001~1500: +2.00 | ||||||
| Cushion type | Variable cushion | ||||||
| Adjustable cushion stroke | 21 | 28 | 29 | ||||
| Port size [Note1] | 1/8" | 1/4" | 3/8" | 1/2" | |||
[Note1] PT thread, G thread are available.
Add) Refer to P365 for detail of sensor switch.
- When load changes in the work, the cylinder with abundant output capacity shall be selected.
- Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.
- Necessary protection measure shall be taken in the environment with higher humidity, much dust or water drops, oil dust and welding dregs.
- Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.
- The medium used by cylinder shall be filtered to 40μm or below.
- Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.
- The cylinder shall be carried out test run without load before application. Prior to run, buffer shall be turned to the minimum and gradually released to avoid the damage on cylinder caused by excessive impact.
- The cylinder shall avoid the influence of side load in operation to maintain the normal work of cylinder and extend the service life.
- If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the surface. Anti-dust caps shall be added in air inlet and outlet ports.
-
AirTAC SCLF Series: Cylinder with Locker - SCLF80X500G
Type:Standard cylinder with locker (double acting),Lock position:Front cover,Bore size:Φ80mm,Stroke:500mm,Magnet:Without magnet,Port thread:G threadProduct Features:1. AirTAC SCL standard cylinder with locker (double acting) — mechanical lock holds the piston rod in position.2. SCLB locks on the back cover; SCLF locks on the front cover.3. SC-series cylinder body and mounting; magnet optional for sensing.4. Air to be filtered by 40μm filter element.
$386.00
-
AirTAC SCLF Series: Cylinder with Locker - SCLF80X500T
Type:Standard cylinder with locker (double acting),Lock position:Front cover,Bore size:Φ80mm,Stroke:500mm,Magnet:Without magnet,Port thread:NPT threadProduct Features:1. AirTAC SCL standard cylinder with locker (double acting) — mechanical lock holds the piston rod in position.2. SCLB locks on the back cover; SCLF locks on the front cover.3. SC-series cylinder body and mounting; magnet optional for sensing.4. Air to be filtered by 40μm filter element.
$386.00
-
AirTAC SCLF Series: Cylinder with Locker - SCLF80X500
Type:Standard cylinder with locker (double acting),Lock position:Front cover,Bore size:Φ80mm,Stroke:500mm,Magnet:Without magnet,Port thread:PT threadProduct Features:1. AirTAC SCL standard cylinder with locker (double acting) — mechanical lock holds the piston rod in position.2. SCLB locks on the back cover; SCLF locks on the front cover.3. SC-series cylinder body and mounting; magnet optional for sensing.4. Air to be filtered by 40μm filter element.
$386.00
-
AirTAC SCLF Series: Cylinder with Locker - SCLF80X500SG
Type:Standard cylinder with locker (double acting),Lock position:Front cover,Bore size:Φ80mm,Stroke:500mm,Magnet:With magnet,Port thread:G threadProduct Features:1. AirTAC SCL standard cylinder with locker (double acting) — mechanical lock holds the piston rod in position.2. SCLB locks on the back cover; SCLF locks on the front cover.3. SC-series cylinder body and mounting; magnet optional for sensing.4. Air to be filtered by 40μm filter element.
$386.00
-
AirTAC SCLF Series: Cylinder with Locker - SCLF80X500ST
Type:Standard cylinder with locker (double acting),Lock position:Front cover,Bore size:Φ80mm,Stroke:500mm,Magnet:With magnet,Port thread:NPT threadProduct Features:1. AirTAC SCL standard cylinder with locker (double acting) — mechanical lock holds the piston rod in position.2. SCLB locks on the back cover; SCLF locks on the front cover.3. SC-series cylinder body and mounting; magnet optional for sensing.4. Air to be filtered by 40μm filter element.
$386.00
-
AirTAC SCLF Series: Cylinder with Locker - SCLF80X500S
Type:Standard cylinder with locker (double acting),Lock position:Front cover,Bore size:Φ80mm,Stroke:500mm,Magnet:With magnet,Port thread:PT threadProduct Features:1. AirTAC SCL standard cylinder with locker (double acting) — mechanical lock holds the piston rod in position.2. SCLB locks on the back cover; SCLF locks on the front cover.3. SC-series cylinder body and mounting; magnet optional for sensing.4. Air to be filtered by 40μm filter element.
$386.00
-
AirTAC SCLF Series: Cylinder with Locker - SCLF80X600G
Type:Standard cylinder with locker (double acting),Lock position:Front cover,Bore size:Φ80mm,Stroke:600mm,Magnet:Without magnet,Port thread:G threadProduct Features:1. AirTAC SCL standard cylinder with locker (double acting) — mechanical lock holds the piston rod in position.2. SCLB locks on the back cover; SCLF locks on the front cover.3. SC-series cylinder body and mounting; magnet optional for sensing.4. Air to be filtered by 40μm filter element.
$408.00
-
AirTAC SCLF Series: Cylinder with Locker - SCLF80X600T
Type:Standard cylinder with locker (double acting),Lock position:Front cover,Bore size:Φ80mm,Stroke:600mm,Magnet:Without magnet,Port thread:NPT threadProduct Features:1. AirTAC SCL standard cylinder with locker (double acting) — mechanical lock holds the piston rod in position.2. SCLB locks on the back cover; SCLF locks on the front cover.3. SC-series cylinder body and mounting; magnet optional for sensing.4. Air to be filtered by 40μm filter element.
$408.00
-
AirTAC SCLF Series: Cylinder with Locker - SCLF80X600
Type:Standard cylinder with locker (double acting),Lock position:Front cover,Bore size:Φ80mm,Stroke:600mm,Magnet:Without magnet,Port thread:PT threadProduct Features:1. AirTAC SCL standard cylinder with locker (double acting) — mechanical lock holds the piston rod in position.2. SCLB locks on the back cover; SCLF locks on the front cover.3. SC-series cylinder body and mounting; magnet optional for sensing.4. Air to be filtered by 40μm filter element.
$408.00
-
AirTAC SCLF Series: Cylinder with Locker - SCLF80X600SG
Type:Standard cylinder with locker (double acting),Lock position:Front cover,Bore size:Φ80mm,Stroke:600mm,Magnet:With magnet,Port thread:G threadProduct Features:1. AirTAC SCL standard cylinder with locker (double acting) — mechanical lock holds the piston rod in position.2. SCLB locks on the back cover; SCLF locks on the front cover.3. SC-series cylinder body and mounting; magnet optional for sensing.4. Air to be filtered by 40μm filter element.
$408.00
-
AirTAC SCLF Series: Cylinder with Locker - SCLF80X600ST
Type:Standard cylinder with locker (double acting),Lock position:Front cover,Bore size:Φ80mm,Stroke:600mm,Magnet:With magnet,Port thread:NPT threadProduct Features:1. AirTAC SCL standard cylinder with locker (double acting) — mechanical lock holds the piston rod in position.2. SCLB locks on the back cover; SCLF locks on the front cover.3. SC-series cylinder body and mounting; magnet optional for sensing.4. Air to be filtered by 40μm filter element.
$408.00
-
AirTAC SCLF Series: Cylinder with Locker - SCLF80X600S
Type:Standard cylinder with locker (double acting),Lock position:Front cover,Bore size:Φ80mm,Stroke:600mm,Magnet:With magnet,Port thread:PT threadProduct Features:1. AirTAC SCL standard cylinder with locker (double acting) — mechanical lock holds the piston rod in position.2. SCLB locks on the back cover; SCLF locks on the front cover.3. SC-series cylinder body and mounting; magnet optional for sensing.4. Air to be filtered by 40μm filter element.
$408.00
-
AirTAC SCLF Series: Cylinder with Locker - SCLF80X700G
Type:Standard cylinder with locker (double acting),Lock position:Front cover,Bore size:Φ80mm,Stroke:700mm,Magnet:Without magnet,Port thread:G threadProduct Features:1. AirTAC SCL standard cylinder with locker (double acting) — mechanical lock holds the piston rod in position.2. SCLB locks on the back cover; SCLF locks on the front cover.3. SC-series cylinder body and mounting; magnet optional for sensing.4. Air to be filtered by 40μm filter element.
$430.00
-
AirTAC SCLF Series: Cylinder with Locker - SCLF80X700T
Type:Standard cylinder with locker (double acting),Lock position:Front cover,Bore size:Φ80mm,Stroke:700mm,Magnet:Without magnet,Port thread:NPT threadProduct Features:1. AirTAC SCL standard cylinder with locker (double acting) — mechanical lock holds the piston rod in position.2. SCLB locks on the back cover; SCLF locks on the front cover.3. SC-series cylinder body and mounting; magnet optional for sensing.4. Air to be filtered by 40μm filter element.
$430.00
-
AirTAC SCLF Series: Cylinder with Locker - SCLF80X700
Type:Standard cylinder with locker (double acting),Lock position:Front cover,Bore size:Φ80mm,Stroke:700mm,Magnet:Without magnet,Port thread:PT threadProduct Features:1. AirTAC SCL standard cylinder with locker (double acting) — mechanical lock holds the piston rod in position.2. SCLB locks on the back cover; SCLF locks on the front cover.3. SC-series cylinder body and mounting; magnet optional for sensing.4. Air to be filtered by 40μm filter element.
$430.00
-
AirTAC SCLF Series: Cylinder with Locker - SCLF80X700SG
Type:Standard cylinder with locker (double acting),Lock position:Front cover,Bore size:Φ80mm,Stroke:700mm,Magnet:With magnet,Port thread:G threadProduct Features:1. AirTAC SCL standard cylinder with locker (double acting) — mechanical lock holds the piston rod in position.2. SCLB locks on the back cover; SCLF locks on the front cover.3. SC-series cylinder body and mounting; magnet optional for sensing.4. Air to be filtered by 40μm filter element.
$430.00
-
AirTAC SCLF Series: Cylinder with Locker - SCLF80X700ST
Type:Standard cylinder with locker (double acting),Lock position:Front cover,Bore size:Φ80mm,Stroke:700mm,Magnet:With magnet,Port thread:NPT threadProduct Features:1. AirTAC SCL standard cylinder with locker (double acting) — mechanical lock holds the piston rod in position.2. SCLB locks on the back cover; SCLF locks on the front cover.3. SC-series cylinder body and mounting; magnet optional for sensing.4. Air to be filtered by 40μm filter element.
$430.00
-
AirTAC SCLF Series: Cylinder with Locker - SCLF80X700S
Type:Standard cylinder with locker (double acting),Lock position:Front cover,Bore size:Φ80mm,Stroke:700mm,Magnet:With magnet,Port thread:PT threadProduct Features:1. AirTAC SCL standard cylinder with locker (double acting) — mechanical lock holds the piston rod in position.2. SCLB locks on the back cover; SCLF locks on the front cover.3. SC-series cylinder body and mounting; magnet optional for sensing.4. Air to be filtered by 40μm filter element.
$430.00
-
AirTAC SCLF Series: Cylinder with Locker - SCLF80X75G
Type:Standard cylinder with locker (double acting),Lock position:Front cover,Bore size:Φ80mm,Stroke:75mm,Magnet:Without magnet,Port thread:G threadProduct Features:1. AirTAC SCL standard cylinder with locker (double acting) — mechanical lock holds the piston rod in position.2. SCLB locks on the back cover; SCLF locks on the front cover.3. SC-series cylinder body and mounting; magnet optional for sensing.4. Air to be filtered by 40μm filter element.
$296.00
-
AirTAC SCLF Series: Cylinder with Locker - SCLF80X75T
Type:Standard cylinder with locker (double acting),Lock position:Front cover,Bore size:Φ80mm,Stroke:75mm,Magnet:Without magnet,Port thread:NPT threadProduct Features:1. AirTAC SCL standard cylinder with locker (double acting) — mechanical lock holds the piston rod in position.2. SCLB locks on the back cover; SCLF locks on the front cover.3. SC-series cylinder body and mounting; magnet optional for sensing.4. Air to be filtered by 40μm filter element.
$296.00
-
AirTAC SCLF Series: Cylinder with Locker - SCLF80X75
Type:Standard cylinder with locker (double acting),Lock position:Front cover,Bore size:Φ80mm,Stroke:75mm,Magnet:Without magnet,Port thread:PT threadProduct Features:1. AirTAC SCL standard cylinder with locker (double acting) — mechanical lock holds the piston rod in position.2. SCLB locks on the back cover; SCLF locks on the front cover.3. SC-series cylinder body and mounting; magnet optional for sensing.4. Air to be filtered by 40μm filter element.
$296.00
-
AirTAC SCLF Series: Cylinder with Locker - SCLF80X75SG
Type:Standard cylinder with locker (double acting),Lock position:Front cover,Bore size:Φ80mm,Stroke:75mm,Magnet:With magnet,Port thread:G threadProduct Features:1. AirTAC SCL standard cylinder with locker (double acting) — mechanical lock holds the piston rod in position.2. SCLB locks on the back cover; SCLF locks on the front cover.3. SC-series cylinder body and mounting; magnet optional for sensing.4. Air to be filtered by 40μm filter element.
$296.00
-
AirTAC SCLF Series: Cylinder with Locker - SCLF80X75ST
Type:Standard cylinder with locker (double acting),Lock position:Front cover,Bore size:Φ80mm,Stroke:75mm,Magnet:With magnet,Port thread:NPT threadProduct Features:1. AirTAC SCL standard cylinder with locker (double acting) — mechanical lock holds the piston rod in position.2. SCLB locks on the back cover; SCLF locks on the front cover.3. SC-series cylinder body and mounting; magnet optional for sensing.4. Air to be filtered by 40μm filter element.
$296.00
-
AirTAC SCLF Series: Cylinder with Locker - SCLF80X75S
Type:Standard cylinder with locker (double acting),Lock position:Front cover,Bore size:Φ80mm,Stroke:75mm,Magnet:With magnet,Port thread:PT threadProduct Features:1. AirTAC SCL standard cylinder with locker (double acting) — mechanical lock holds the piston rod in position.2. SCLB locks on the back cover; SCLF locks on the front cover.3. SC-series cylinder body and mounting; magnet optional for sensing.4. Air to be filtered by 40μm filter element.
$296.00
