AirTAC SG,SGC Series
ISO 15552 Cylinder SGC Series
- ISO15552 (original ISO6431) standard cylinder.
- The piston seal is composed of two Y-shape seals of single-direction structure, which has compensation function, long service life and low start-up pressure.
- SGC series cylinders are made of aluminum pipe.
- The buffer adjustment of cylinder is smooth and steady.
- Cylinders and accessories for installation with several specifications are optional.
- The seal material with high temperature resistance is adopted to guarantee the normal operation of cylinder at 150℃.
Specification
Installation & Usage
Ordering Code
Symbol
Download
| Bore size (mm) | 125 | 160 | 200 | 250 | |
|---|---|---|---|---|---|
| Acting type | Double acting | ||||
| Fluid | Air (to be filtered by 40μm filter element) | ||||
| Mounting type | SGC | Basic, FA, FB, CA, CB, CR, LB, TC, FTC, TCM1, TCM2 | |||
| SGCD, SGCJ | Basic, FA, LB, TC, FTC, TCM1, TCM2 | ||||
| Operating pressure | 0.15~1.0MPa (22~145psi) (1.5~10.0bar) | ||||
| Proof pressure | 1.5MPa (215psi) (15bar) | ||||
| Temperature ℃ | -20~70 | ||||
| Speed range mm/s | 30~500 | ||||
| Stroke tolerance | 0~250: +1.00; 251~1000: +1.50; 1001~1500: +2.00 | ||||
| Cushion type | Variable cushion | ||||
| Adjustable cushion stroke | 40 | 50 | 60 | ||
| Port size [Note1] | 1/2" | 3/4" | 1" | ||
[Note1] PT thread, G thread are available.
Add) Refer to P365 for detail of sensor switch.
- When load changes in the work, the cylinder with abundant output capacity shall be selected.
- Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.
- Necessary protection measure shall be taken in the environment with higher humidity, much dust or water drops, oil dust and welding dregs.
- Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.
- The medium used by cylinder shall be filtered to 40μm or below.
- Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.
- The cylinder shall be carried out test run without load before application. Prior to run, buffer shall be turned to the minimum and gradually released to avoid the damage on cylinder caused by excessive impact.
- The cylinder shall avoid the influence of side load in operation to maintain the normal work of cylinder and extend the service life.
- If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the surface. Anti-dust caps shall be added in air inlet and outlet ports.
-
AirTAC SGC Series: ISO15552 Standard Cylinder - SGC125X400
Bore size:φ125mm,Stroke:400mm,Acting type:Double acting,Magnet:Without magnet,Seal material:TPU,Port thread:PT threadProduct Features:1. ISO 15552 (original ISO 6431) standard cylinder, large bore (125–250mm), aluminum barrel.2. The piston seal adopts a heterogeneous two-way seal structure with tight dimension and oil reservation.3. Variable cushion; buffer adjustment is smooth and steady.4. High-temperature-resistant seal material available; mounting accessories optional.
$327.00
-
AirTAC SGC Series: ISO15552 Standard Cylinder - SGC125X400G
Bore size:φ125mm,Stroke:400mm,Acting type:Double acting,Magnet:Without magnet,Seal material:TPU,Port thread:G threadProduct Features:1. ISO 15552 (original ISO 6431) standard cylinder, large bore (125–250mm), aluminum barrel.2. The piston seal adopts a heterogeneous two-way seal structure with tight dimension and oil reservation.3. Variable cushion; buffer adjustment is smooth and steady.4. High-temperature-resistant seal material available; mounting accessories optional.
$327.00
-
AirTAC SGC Series: ISO15552 Standard Cylinder - SGC125X400H
Bore size:φ125mm,Stroke:400mm,Acting type:Double acting,Magnet:Without magnet,Seal material:FKM (Viton),Port thread:PT threadProduct Features:1. ISO 15552 (original ISO 6431) standard cylinder, large bore (125–250mm), aluminum barrel.2. The piston seal adopts a heterogeneous two-way seal structure with tight dimension and oil reservation.3. Variable cushion; buffer adjustment is smooth and steady.4. High-temperature-resistant seal material available; mounting accessories optional.
$331.00
-
AirTAC SGC Series: ISO15552 Standard Cylinder - SGC125X400HG
Bore size:φ125mm,Stroke:400mm,Acting type:Double acting,Magnet:Without magnet,Seal material:FKM (Viton),Port thread:G threadProduct Features:1. ISO 15552 (original ISO 6431) standard cylinder, large bore (125–250mm), aluminum barrel.2. The piston seal adopts a heterogeneous two-way seal structure with tight dimension and oil reservation.3. Variable cushion; buffer adjustment is smooth and steady.4. High-temperature-resistant seal material available; mounting accessories optional.
$331.00
-
AirTAC SGC Series: ISO15552 Standard Cylinder - SGC125X400N
Bore size:φ125mm,Stroke:400mm,Acting type:Double acting,Magnet:Without magnet,Seal material:NBR,Port thread:PT threadProduct Features:1. ISO 15552 (original ISO 6431) standard cylinder, large bore (125–250mm), aluminum barrel.2. The piston seal adopts a heterogeneous two-way seal structure with tight dimension and oil reservation.3. Variable cushion; buffer adjustment is smooth and steady.4. High-temperature-resistant seal material available; mounting accessories optional.
$331.00
-
AirTAC SGC Series: ISO15552 Standard Cylinder - SGC125X400NG
Bore size:φ125mm,Stroke:400mm,Acting type:Double acting,Magnet:Without magnet,Seal material:NBR,Port thread:G threadProduct Features:1. ISO 15552 (original ISO 6431) standard cylinder, large bore (125–250mm), aluminum barrel.2. The piston seal adopts a heterogeneous two-way seal structure with tight dimension and oil reservation.3. Variable cushion; buffer adjustment is smooth and steady.4. High-temperature-resistant seal material available; mounting accessories optional.
$331.00
-
AirTAC SGC Series: ISO15552 Standard Cylinder - SGC125X400S
Bore size:φ125mm,Stroke:400mm,Acting type:Double acting,Magnet:With magnet,Seal material:TPU,Port thread:PT threadProduct Features:1. ISO 15552 (original ISO 6431) standard cylinder, large bore (125–250mm), aluminum barrel.2. The piston seal adopts a heterogeneous two-way seal structure with tight dimension and oil reservation.3. Variable cushion; buffer adjustment is smooth and steady.4. High-temperature-resistant seal material available; mounting accessories optional.
$327.00
-
AirTAC SGC Series: ISO15552 Standard Cylinder - SGC125X400SG
Bore size:φ125mm,Stroke:400mm,Acting type:Double acting,Magnet:With magnet,Seal material:TPU,Port thread:G threadProduct Features:1. ISO 15552 (original ISO 6431) standard cylinder, large bore (125–250mm), aluminum barrel.2. The piston seal adopts a heterogeneous two-way seal structure with tight dimension and oil reservation.3. Variable cushion; buffer adjustment is smooth and steady.4. High-temperature-resistant seal material available; mounting accessories optional.
$327.00
-
AirTAC SGC Series: ISO15552 Standard Cylinder - SGC125X400SH
Bore size:φ125mm,Stroke:400mm,Acting type:Double acting,Magnet:With magnet,Seal material:FKM (Viton),Port thread:PT threadProduct Features:1. ISO 15552 (original ISO 6431) standard cylinder, large bore (125–250mm), aluminum barrel.2. The piston seal adopts a heterogeneous two-way seal structure with tight dimension and oil reservation.3. Variable cushion; buffer adjustment is smooth and steady.4. High-temperature-resistant seal material available; mounting accessories optional.
$331.00
-
AirTAC SGC Series: ISO15552 Standard Cylinder - SGC125X400SHG
Bore size:φ125mm,Stroke:400mm,Acting type:Double acting,Magnet:With magnet,Seal material:FKM (Viton),Port thread:G threadProduct Features:1. ISO 15552 (original ISO 6431) standard cylinder, large bore (125–250mm), aluminum barrel.2. The piston seal adopts a heterogeneous two-way seal structure with tight dimension and oil reservation.3. Variable cushion; buffer adjustment is smooth and steady.4. High-temperature-resistant seal material available; mounting accessories optional.
$331.00
-
AirTAC SGC Series: ISO15552 Standard Cylinder - SGC125X400SN
Bore size:φ125mm,Stroke:400mm,Acting type:Double acting,Magnet:With magnet,Seal material:NBR,Port thread:PT threadProduct Features:1. ISO 15552 (original ISO 6431) standard cylinder, large bore (125–250mm), aluminum barrel.2. The piston seal adopts a heterogeneous two-way seal structure with tight dimension and oil reservation.3. Variable cushion; buffer adjustment is smooth and steady.4. High-temperature-resistant seal material available; mounting accessories optional.
$331.00
-
AirTAC SGC Series: ISO15552 Standard Cylinder - SGC125X400SNG
Bore size:φ125mm,Stroke:400mm,Acting type:Double acting,Magnet:With magnet,Seal material:NBR,Port thread:G threadProduct Features:1. ISO 15552 (original ISO 6431) standard cylinder, large bore (125–250mm), aluminum barrel.2. The piston seal adopts a heterogeneous two-way seal structure with tight dimension and oil reservation.3. Variable cushion; buffer adjustment is smooth and steady.4. High-temperature-resistant seal material available; mounting accessories optional.
$331.00
-
AirTAC SGC Series: ISO15552 Standard Cylinder - SGC125X450
Bore size:φ125mm,Stroke:450mm,Acting type:Double acting,Magnet:Without magnet,Seal material:TPU,Port thread:PT threadProduct Features:1. ISO 15552 (original ISO 6431) standard cylinder, large bore (125–250mm), aluminum barrel.2. The piston seal adopts a heterogeneous two-way seal structure with tight dimension and oil reservation.3. Variable cushion; buffer adjustment is smooth and steady.4. High-temperature-resistant seal material available; mounting accessories optional.
$338.00
-
AirTAC SGC Series: ISO15552 Standard Cylinder - SGC125X450G
Bore size:φ125mm,Stroke:450mm,Acting type:Double acting,Magnet:Without magnet,Seal material:TPU,Port thread:G threadProduct Features:1. ISO 15552 (original ISO 6431) standard cylinder, large bore (125–250mm), aluminum barrel.2. The piston seal adopts a heterogeneous two-way seal structure with tight dimension and oil reservation.3. Variable cushion; buffer adjustment is smooth and steady.4. High-temperature-resistant seal material available; mounting accessories optional.
$338.00
-
AirTAC SGC Series: ISO15552 Standard Cylinder - SGC125X450H
Bore size:φ125mm,Stroke:450mm,Acting type:Double acting,Magnet:Without magnet,Seal material:FKM (Viton),Port thread:PT threadProduct Features:1. ISO 15552 (original ISO 6431) standard cylinder, large bore (125–250mm), aluminum barrel.2. The piston seal adopts a heterogeneous two-way seal structure with tight dimension and oil reservation.3. Variable cushion; buffer adjustment is smooth and steady.4. High-temperature-resistant seal material available; mounting accessories optional.
$342.00
-
AirTAC SGC Series: ISO15552 Standard Cylinder - SGC125X450HG
Bore size:φ125mm,Stroke:450mm,Acting type:Double acting,Magnet:Without magnet,Seal material:FKM (Viton),Port thread:G threadProduct Features:1. ISO 15552 (original ISO 6431) standard cylinder, large bore (125–250mm), aluminum barrel.2. The piston seal adopts a heterogeneous two-way seal structure with tight dimension and oil reservation.3. Variable cushion; buffer adjustment is smooth and steady.4. High-temperature-resistant seal material available; mounting accessories optional.
$342.00
-
AirTAC SGC Series: ISO15552 Standard Cylinder - SGC125X450N
Bore size:φ125mm,Stroke:450mm,Acting type:Double acting,Magnet:Without magnet,Seal material:NBR,Port thread:PT threadProduct Features:1. ISO 15552 (original ISO 6431) standard cylinder, large bore (125–250mm), aluminum barrel.2. The piston seal adopts a heterogeneous two-way seal structure with tight dimension and oil reservation.3. Variable cushion; buffer adjustment is smooth and steady.4. High-temperature-resistant seal material available; mounting accessories optional.
$342.00
-
AirTAC SGC Series: ISO15552 Standard Cylinder - SGC125X450NG
Bore size:φ125mm,Stroke:450mm,Acting type:Double acting,Magnet:Without magnet,Seal material:NBR,Port thread:G threadProduct Features:1. ISO 15552 (original ISO 6431) standard cylinder, large bore (125–250mm), aluminum barrel.2. The piston seal adopts a heterogeneous two-way seal structure with tight dimension and oil reservation.3. Variable cushion; buffer adjustment is smooth and steady.4. High-temperature-resistant seal material available; mounting accessories optional.
$342.00
-
AirTAC SGC Series: ISO15552 Standard Cylinder - SGC125X450S
Bore size:φ125mm,Stroke:450mm,Acting type:Double acting,Magnet:With magnet,Seal material:TPU,Port thread:PT threadProduct Features:1. ISO 15552 (original ISO 6431) standard cylinder, large bore (125–250mm), aluminum barrel.2. The piston seal adopts a heterogeneous two-way seal structure with tight dimension and oil reservation.3. Variable cushion; buffer adjustment is smooth and steady.4. High-temperature-resistant seal material available; mounting accessories optional.
$338.00
-
AirTAC SGC Series: ISO15552 Standard Cylinder - SGC125X450SG
Bore size:φ125mm,Stroke:450mm,Acting type:Double acting,Magnet:With magnet,Seal material:TPU,Port thread:G threadProduct Features:1. ISO 15552 (original ISO 6431) standard cylinder, large bore (125–250mm), aluminum barrel.2. The piston seal adopts a heterogeneous two-way seal structure with tight dimension and oil reservation.3. Variable cushion; buffer adjustment is smooth and steady.4. High-temperature-resistant seal material available; mounting accessories optional.
$338.00
-
AirTAC SGC Series: ISO15552 Standard Cylinder - SGC125X450SH
Bore size:φ125mm,Stroke:450mm,Acting type:Double acting,Magnet:With magnet,Seal material:FKM (Viton),Port thread:PT threadProduct Features:1. ISO 15552 (original ISO 6431) standard cylinder, large bore (125–250mm), aluminum barrel.2. The piston seal adopts a heterogeneous two-way seal structure with tight dimension and oil reservation.3. Variable cushion; buffer adjustment is smooth and steady.4. High-temperature-resistant seal material available; mounting accessories optional.
$342.00
-
AirTAC SGC Series: ISO15552 Standard Cylinder - SGC125X450SHG
Bore size:φ125mm,Stroke:450mm,Acting type:Double acting,Magnet:With magnet,Seal material:FKM (Viton),Port thread:G threadProduct Features:1. ISO 15552 (original ISO 6431) standard cylinder, large bore (125–250mm), aluminum barrel.2. The piston seal adopts a heterogeneous two-way seal structure with tight dimension and oil reservation.3. Variable cushion; buffer adjustment is smooth and steady.4. High-temperature-resistant seal material available; mounting accessories optional.
$342.00
-
AirTAC SGC Series: ISO15552 Standard Cylinder - SGC125X450SN
Bore size:φ125mm,Stroke:450mm,Acting type:Double acting,Magnet:With magnet,Seal material:NBR,Port thread:PT threadProduct Features:1. ISO 15552 (original ISO 6431) standard cylinder, large bore (125–250mm), aluminum barrel.2. The piston seal adopts a heterogeneous two-way seal structure with tight dimension and oil reservation.3. Variable cushion; buffer adjustment is smooth and steady.4. High-temperature-resistant seal material available; mounting accessories optional.
$342.00
-
AirTAC SGC Series: ISO15552 Standard Cylinder - SGC125X450SNG
Bore size:φ125mm,Stroke:450mm,Acting type:Double acting,Magnet:With magnet,Seal material:NBR,Port thread:G threadProduct Features:1. ISO 15552 (original ISO 6431) standard cylinder, large bore (125–250mm), aluminum barrel.2. The piston seal adopts a heterogeneous two-way seal structure with tight dimension and oil reservation.3. Variable cushion; buffer adjustment is smooth and steady.4. High-temperature-resistant seal material available; mounting accessories optional.
$342.00
