AirTAC TCL,TCM Series
JIS Cylinder TCL,TCM Series Guided style
- JIS standard is implemented.
- Two guides of special bearing steel and linear bearing or bronze bearing guide are used to prevent rotating. They can bear high torque and radial load.
★Note: Steel ball linear bearing: It is suitable for elevation action of cylinder or the situation requiring high precision and high bearing ability, especially for the situation requiring low fraction action process.
Bronze sliding bearing: it is suitable for the action that has radial load resistance. Compared with normal cylinder of same use, the horizontal impact resistance is doubled and it has stronger torsion rigidity. - Drive unit and guide unit are in the same barrel that no additional accessories are needed with minimal space required. The air intake is optional and it is convenient to install.
- The bottom, back side and fixing plate of main body respectively has two exact orientation orifices (See ΦPA orifice and the orifice in XX point), which can provide orientation installation with high precision for the special situation.
- Options of switch mounting with provision 4 mounting slots.
- Special design of main body provides multi-mount;
Specification
Installation & Usage
Ordering Code
Symbol
Download
| Bore size (mm) | 6 | 10 | 12 | 16 | 20 | 25 | 32 | 40 | 50 | 63 | 80 | 100 | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Acting type | Double acting | ||||||||||||
| Fluid | Air (to be filtered by 40μm filter element) | ||||||||||||
| Operating pressure | 0.2~0.7MPa (29~100psi) | 0.15~1.0MPa (22~145psi) | |||||||||||
| Proof pressure | 1.2MPa (175psi) | 1.5MPa (215psi) | |||||||||||
| Temperature ℃ | -20~70 | ||||||||||||
| Speed range mm/s | 50~500 | 30~500 | 50~400 | ||||||||||
| Stroke tolerance | ≤100: +1.00; >100: +1.50 | ||||||||||||
| Cushion type | Bumper | ||||||||||||
| Non-rotating tolerance [Note1] | TCL | - | ±0.08° | ±0.07° | ±0.06° | ±0.05° | ±0.04° | ||||||
| TCM | ±0.1° | ±0.10° | ±0.09° | ±0.08° | ±0.06° | ±0.05° | |||||||
| Port size [Note2] | M3×0.5 | M5×0.8 | 1/8" | 1/4" | 3/8" | ||||||||
[Note1] Retract position.
[Note2] PT thread, G thread and NPT thread are available.
Add) Refer to P365 for detail of sensor switch.
- When load changes in the work, the cylinder with abundant output capacity shall be selected.
- Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.
- Necessary protection measure shall be taken in the environment with higher humidity, much dust or water drops, oil dust and welding dregs.
- Dirty substances in the pipe must be cleared away before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.
- The medium used by cylinder shall be filtered to 40μm or below.
- The cylinder shall avoid the influence of side load in operation to maintain the normal work of cylinder and extend the service life.
- Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.
- If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the surface. Anti-dust cap shall be inserted into the inlet and outlet ports. As the precision of the manufacture and guide is high, never dismantle the fixed block or cylinder cover without permission.
-
AirTAC TCL Series: Tri-rod Guided Cylinder - TCL32X100S
Bore size:φ32mm,Stroke:100mm,Acting type:Double acting,Cylinder type:Tri-rod guided,Guide bearing:Linear bearing,Magnet:With magnet,Port thread:PT threadProduct Features:1. JIS standard is implemented.2. Two guides of linear bearing or brass sliding bearing prevent rotation and bear high torque and radial load.3. Drive unit and guide unit are in the same barrel; no additional accessories needed, minimal installation space.4. Orientation orifices on the bottom/back/fixing plate provide high-precision orientation installation; multi-mount design.
$265.00
-
AirTAC TCL Series: Tri-rod Guided Cylinder - TCL32X100SG
Bore size:φ32mm,Stroke:100mm,Acting type:Double acting,Cylinder type:Tri-rod guided,Guide bearing:Linear bearing,Magnet:With magnet,Port thread:G threadProduct Features:1. JIS standard is implemented.2. Two guides of linear bearing or brass sliding bearing prevent rotation and bear high torque and radial load.3. Drive unit and guide unit are in the same barrel; no additional accessories needed, minimal installation space.4. Orientation orifices on the bottom/back/fixing plate provide high-precision orientation installation; multi-mount design.
$265.00
-
AirTAC TCL Series: Tri-rod Guided Cylinder - TCL32X100ST
Bore size:φ32mm,Stroke:100mm,Acting type:Double acting,Cylinder type:Tri-rod guided,Guide bearing:Linear bearing,Magnet:With magnet,Port thread:NPT threadProduct Features:1. JIS standard is implemented.2. Two guides of linear bearing or brass sliding bearing prevent rotation and bear high torque and radial load.3. Drive unit and guide unit are in the same barrel; no additional accessories needed, minimal installation space.4. Orientation orifices on the bottom/back/fixing plate provide high-precision orientation installation; multi-mount design.
$265.00
-
AirTAC TCL Series: Tri-rod Guided Cylinder - TCL32X125S
Bore size:φ32mm,Stroke:125mm,Acting type:Double acting,Cylinder type:Tri-rod guided,Guide bearing:Linear bearing,Magnet:With magnet,Port thread:PT threadProduct Features:1. JIS standard is implemented.2. Two guides of linear bearing or brass sliding bearing prevent rotation and bear high torque and radial load.3. Drive unit and guide unit are in the same barrel; no additional accessories needed, minimal installation space.4. Orientation orifices on the bottom/back/fixing plate provide high-precision orientation installation; multi-mount design.
$274.00
-
AirTAC TCL Series: Tri-rod Guided Cylinder - TCL32X125SG
Bore size:φ32mm,Stroke:125mm,Acting type:Double acting,Cylinder type:Tri-rod guided,Guide bearing:Linear bearing,Magnet:With magnet,Port thread:G threadProduct Features:1. JIS standard is implemented.2. Two guides of linear bearing or brass sliding bearing prevent rotation and bear high torque and radial load.3. Drive unit and guide unit are in the same barrel; no additional accessories needed, minimal installation space.4. Orientation orifices on the bottom/back/fixing plate provide high-precision orientation installation; multi-mount design.
$274.00
-
AirTAC TCL Series: Tri-rod Guided Cylinder - TCL32X125ST
Bore size:φ32mm,Stroke:125mm,Acting type:Double acting,Cylinder type:Tri-rod guided,Guide bearing:Linear bearing,Magnet:With magnet,Port thread:NPT threadProduct Features:1. JIS standard is implemented.2. Two guides of linear bearing or brass sliding bearing prevent rotation and bear high torque and radial load.3. Drive unit and guide unit are in the same barrel; no additional accessories needed, minimal installation space.4. Orientation orifices on the bottom/back/fixing plate provide high-precision orientation installation; multi-mount design.
$274.00
-
AirTAC TCL Series: Tri-rod Guided Cylinder - TCL32X150S
Bore size:φ32mm,Stroke:150mm,Acting type:Double acting,Cylinder type:Tri-rod guided,Guide bearing:Linear bearing,Magnet:With magnet,Port thread:PT threadProduct Features:1. JIS standard is implemented.2. Two guides of linear bearing or brass sliding bearing prevent rotation and bear high torque and radial load.3. Drive unit and guide unit are in the same barrel; no additional accessories needed, minimal installation space.4. Orientation orifices on the bottom/back/fixing plate provide high-precision orientation installation; multi-mount design.
$278.00
-
AirTAC TCL Series: Tri-rod Guided Cylinder - TCL32X150SG
Bore size:φ32mm,Stroke:150mm,Acting type:Double acting,Cylinder type:Tri-rod guided,Guide bearing:Linear bearing,Magnet:With magnet,Port thread:G threadProduct Features:1. JIS standard is implemented.2. Two guides of linear bearing or brass sliding bearing prevent rotation and bear high torque and radial load.3. Drive unit and guide unit are in the same barrel; no additional accessories needed, minimal installation space.4. Orientation orifices on the bottom/back/fixing plate provide high-precision orientation installation; multi-mount design.
$278.00
-
AirTAC TCL Series: Tri-rod Guided Cylinder - TCL32X150ST
Bore size:φ32mm,Stroke:150mm,Acting type:Double acting,Cylinder type:Tri-rod guided,Guide bearing:Linear bearing,Magnet:With magnet,Port thread:NPT threadProduct Features:1. JIS standard is implemented.2. Two guides of linear bearing or brass sliding bearing prevent rotation and bear high torque and radial load.3. Drive unit and guide unit are in the same barrel; no additional accessories needed, minimal installation space.4. Orientation orifices on the bottom/back/fixing plate provide high-precision orientation installation; multi-mount design.
$278.00
-
AirTAC TCL Series: Tri-rod Guided Cylinder - TCL32X175S
Bore size:φ32mm,Stroke:175mm,Acting type:Double acting,Cylinder type:Tri-rod guided,Guide bearing:Linear bearing,Magnet:With magnet,Port thread:PT threadProduct Features:1. JIS standard is implemented.2. Two guides of linear bearing or brass sliding bearing prevent rotation and bear high torque and radial load.3. Drive unit and guide unit are in the same barrel; no additional accessories needed, minimal installation space.4. Orientation orifices on the bottom/back/fixing plate provide high-precision orientation installation; multi-mount design.
$300.00
-
AirTAC TCL Series: Tri-rod Guided Cylinder - TCL32X175SG
Bore size:φ32mm,Stroke:175mm,Acting type:Double acting,Cylinder type:Tri-rod guided,Guide bearing:Linear bearing,Magnet:With magnet,Port thread:G threadProduct Features:1. JIS standard is implemented.2. Two guides of linear bearing or brass sliding bearing prevent rotation and bear high torque and radial load.3. Drive unit and guide unit are in the same barrel; no additional accessories needed, minimal installation space.4. Orientation orifices on the bottom/back/fixing plate provide high-precision orientation installation; multi-mount design.
$300.00
-
AirTAC TCL Series: Tri-rod Guided Cylinder - TCL32X175ST
Bore size:φ32mm,Stroke:175mm,Acting type:Double acting,Cylinder type:Tri-rod guided,Guide bearing:Linear bearing,Magnet:With magnet,Port thread:NPT threadProduct Features:1. JIS standard is implemented.2. Two guides of linear bearing or brass sliding bearing prevent rotation and bear high torque and radial load.3. Drive unit and guide unit are in the same barrel; no additional accessories needed, minimal installation space.4. Orientation orifices on the bottom/back/fixing plate provide high-precision orientation installation; multi-mount design.
$300.00
-
AirTAC TCL Series: Tri-rod Guided Cylinder - TCL32X200S
Bore size:φ32mm,Stroke:200mm,Acting type:Double acting,Cylinder type:Tri-rod guided,Guide bearing:Linear bearing,Magnet:With magnet,Port thread:PT threadProduct Features:1. JIS standard is implemented.2. Two guides of linear bearing or brass sliding bearing prevent rotation and bear high torque and radial load.3. Drive unit and guide unit are in the same barrel; no additional accessories needed, minimal installation space.4. Orientation orifices on the bottom/back/fixing plate provide high-precision orientation installation; multi-mount design.
$305.00
-
AirTAC TCL Series: Tri-rod Guided Cylinder - TCL32X200SG
Bore size:φ32mm,Stroke:200mm,Acting type:Double acting,Cylinder type:Tri-rod guided,Guide bearing:Linear bearing,Magnet:With magnet,Port thread:G threadProduct Features:1. JIS standard is implemented.2. Two guides of linear bearing or brass sliding bearing prevent rotation and bear high torque and radial load.3. Drive unit and guide unit are in the same barrel; no additional accessories needed, minimal installation space.4. Orientation orifices on the bottom/back/fixing plate provide high-precision orientation installation; multi-mount design.
$305.00
-
AirTAC TCL Series: Tri-rod Guided Cylinder - TCL32X200ST
Bore size:φ32mm,Stroke:200mm,Acting type:Double acting,Cylinder type:Tri-rod guided,Guide bearing:Linear bearing,Magnet:With magnet,Port thread:NPT threadProduct Features:1. JIS standard is implemented.2. Two guides of linear bearing or brass sliding bearing prevent rotation and bear high torque and radial load.3. Drive unit and guide unit are in the same barrel; no additional accessories needed, minimal installation space.4. Orientation orifices on the bottom/back/fixing plate provide high-precision orientation installation; multi-mount design.
$305.00
-
AirTAC TCL Series: Tri-rod Guided Cylinder - TCL32X225S
Bore size:φ32mm,Stroke:225mm,Acting type:Double acting,Cylinder type:Tri-rod guided,Guide bearing:Linear bearing,Magnet:With magnet,Port thread:PT threadProduct Features:1. JIS standard is implemented.2. Two guides of linear bearing or brass sliding bearing prevent rotation and bear high torque and radial load.3. Drive unit and guide unit are in the same barrel; no additional accessories needed, minimal installation space.4. Orientation orifices on the bottom/back/fixing plate provide high-precision orientation installation; multi-mount design.
$311.00
-
AirTAC TCL Series: Tri-rod Guided Cylinder - TCL32X225SG
Bore size:φ32mm,Stroke:225mm,Acting type:Double acting,Cylinder type:Tri-rod guided,Guide bearing:Linear bearing,Magnet:With magnet,Port thread:G threadProduct Features:1. JIS standard is implemented.2. Two guides of linear bearing or brass sliding bearing prevent rotation and bear high torque and radial load.3. Drive unit and guide unit are in the same barrel; no additional accessories needed, minimal installation space.4. Orientation orifices on the bottom/back/fixing plate provide high-precision orientation installation; multi-mount design.
$311.00
-
AirTAC TCL Series: Tri-rod Guided Cylinder - TCL32X225ST
Bore size:φ32mm,Stroke:225mm,Acting type:Double acting,Cylinder type:Tri-rod guided,Guide bearing:Linear bearing,Magnet:With magnet,Port thread:NPT threadProduct Features:1. JIS standard is implemented.2. Two guides of linear bearing or brass sliding bearing prevent rotation and bear high torque and radial load.3. Drive unit and guide unit are in the same barrel; no additional accessories needed, minimal installation space.4. Orientation orifices on the bottom/back/fixing plate provide high-precision orientation installation; multi-mount design.
$311.00
-
AirTAC TCL Series: Tri-rod Guided Cylinder - TCL32X250S
Bore size:φ32mm,Stroke:250mm,Acting type:Double acting,Cylinder type:Tri-rod guided,Guide bearing:Linear bearing,Magnet:With magnet,Port thread:PT threadProduct Features:1. JIS standard is implemented.2. Two guides of linear bearing or brass sliding bearing prevent rotation and bear high torque and radial load.3. Drive unit and guide unit are in the same barrel; no additional accessories needed, minimal installation space.4. Orientation orifices on the bottom/back/fixing plate provide high-precision orientation installation; multi-mount design.
$324.00
-
AirTAC TCL Series: Tri-rod Guided Cylinder - TCL32X250SG
Bore size:φ32mm,Stroke:250mm,Acting type:Double acting,Cylinder type:Tri-rod guided,Guide bearing:Linear bearing,Magnet:With magnet,Port thread:G threadProduct Features:1. JIS standard is implemented.2. Two guides of linear bearing or brass sliding bearing prevent rotation and bear high torque and radial load.3. Drive unit and guide unit are in the same barrel; no additional accessories needed, minimal installation space.4. Orientation orifices on the bottom/back/fixing plate provide high-precision orientation installation; multi-mount design.
$324.00
-
AirTAC TCL Series: Tri-rod Guided Cylinder - TCL32X250ST
Bore size:φ32mm,Stroke:250mm,Acting type:Double acting,Cylinder type:Tri-rod guided,Guide bearing:Linear bearing,Magnet:With magnet,Port thread:NPT threadProduct Features:1. JIS standard is implemented.2. Two guides of linear bearing or brass sliding bearing prevent rotation and bear high torque and radial load.3. Drive unit and guide unit are in the same barrel; no additional accessories needed, minimal installation space.4. Orientation orifices on the bottom/back/fixing plate provide high-precision orientation installation; multi-mount design.
$324.00
-
AirTAC TCL Series: Tri-rod Guided Cylinder - TCL32X25S
Bore size:φ32mm,Stroke:25mm,Acting type:Double acting,Cylinder type:Tri-rod guided,Guide bearing:Linear bearing,Magnet:With magnet,Port thread:PT threadProduct Features:1. JIS standard is implemented.2. Two guides of linear bearing or brass sliding bearing prevent rotation and bear high torque and radial load.3. Drive unit and guide unit are in the same barrel; no additional accessories needed, minimal installation space.4. Orientation orifices on the bottom/back/fixing plate provide high-precision orientation installation; multi-mount design.
$200.00
-
AirTAC TCL Series: Tri-rod Guided Cylinder - TCL32X25SG
Bore size:φ32mm,Stroke:25mm,Acting type:Double acting,Cylinder type:Tri-rod guided,Guide bearing:Linear bearing,Magnet:With magnet,Port thread:G threadProduct Features:1. JIS standard is implemented.2. Two guides of linear bearing or brass sliding bearing prevent rotation and bear high torque and radial load.3. Drive unit and guide unit are in the same barrel; no additional accessories needed, minimal installation space.4. Orientation orifices on the bottom/back/fixing plate provide high-precision orientation installation; multi-mount design.
$200.00
-
AirTAC TCL Series: Tri-rod Guided Cylinder - TCL32X25ST
Bore size:φ32mm,Stroke:25mm,Acting type:Double acting,Cylinder type:Tri-rod guided,Guide bearing:Linear bearing,Magnet:With magnet,Port thread:NPT threadProduct Features:1. JIS standard is implemented.2. Two guides of linear bearing or brass sliding bearing prevent rotation and bear high torque and radial load.3. Drive unit and guide unit are in the same barrel; no additional accessories needed, minimal installation space.4. Orientation orifices on the bottom/back/fixing plate provide high-precision orientation installation; multi-mount design.
$200.00
