AirTAC TN Series
TN Series Dual rod Cylinder
- Enterprises standard is implemented.
- Embedded installation and fixation mode saves the installation space.
- It is good resistance to bending and twisting moments.
- Mounting holes on three sides facilitates multi-position mounting.
- Bumper in front of the barrel can adjust the stroke of cylinder and relieve impact.
- Standard configuration of this series has magnet and the type without magnet is not available.
Specification
Installation & Usage
Ordering Code
Symbol
Download
| Bore size (mm) | 10 | 16 | 20 | 25 | 32 |
|---|---|---|---|---|---|
| Acting type | Double acting | ||||
| Fluid | Air (to be filtered by 40μm filter element) | ||||
| Operating pressure | 0.2~1.0MPa (29~145psi) | 0.15~1.0MPa (22~145psi) | |||
| Proof pressure | 1.5MPa (215psi) | ||||
| Temperature ℃ | -20~70 | ||||
| Speed range mm/s | 30~500 | ||||
| Adjustable stroke mm | -5~0 | ||||
| Stroke tolerance | ≤100: +1.00; >100: +1.50 | ||||
| Cushion type | Bumper | ||||
| Non-rotating tolerance [Note1] | ±0.4° | ±0.3° | |||
| Port size [Note2] | M5×0.8 | 1/8" | |||
[Note1] Retract position.
[Note2] PT thread is available.
Add) Refer to P365 for detail of sensor switch.
- When load changes in the work, the cylinder with abundant output capacity shall be selected.
- Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.
- Necessary protection measure shall be taken in the environment with higher humidity, much dust or water drops, oil dust and welding dregs.
- Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.
- The medium used by cylinder shall be filtered to 40μm or below.
- As both the front cover and piston are short, too large stroke can not be selected.
- Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.
- The cylinder shall avoid radial load in operation to maintain the normal and extend service life.
- If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the surface. Anti-dust cap shall be inserted into the inlet and outlet ports. As the precision of the manufacture and guide is high, please do not dismantle the fixed block or cylinder cover.
-
AirTAC TN Series: Twin-rod Cylinder - TN16X30S
Bore size:φ16mm,Stroke:30mm,Acting type:Double acting,Cylinder type:Twin-rod,Standard:Enterprise standard,Magnet:With magnet,Port thread:PT threadProduct Features:1. Twin-rod cylinder with good resistance to bending and twisting moments.2. Double acting; bumper in front of the barrel adjusts stroke and relieves impact.3. Workpiece can be mounted from multiple directions; magnetic switch slots around the body.
$122.00
-
AirTAC TN Series: Twin-rod Cylinder - TN16X30ST
Bore size:φ16mm,Stroke:30mm,Acting type:Double acting,Cylinder type:Twin-rod,Standard:Enterprise standard,Magnet:With magnet,Port thread:NPT threadProduct Features:1. Twin-rod cylinder with good resistance to bending and twisting moments.2. Double acting; bumper in front of the barrel adjusts stroke and relieves impact.3. Workpiece can be mounted from multiple directions; magnetic switch slots around the body.
$122.00
-
AirTAC TN Series: Twin-rod Cylinder - TN16X30SG
Bore size:φ16mm,Stroke:30mm,Acting type:Double acting,Cylinder type:Twin-rod,Standard:Enterprise standard,Magnet:With magnet,Port thread:G threadProduct Features:1. Twin-rod cylinder with good resistance to bending and twisting moments.2. Double acting; bumper in front of the barrel adjusts stroke and relieves impact.3. Workpiece can be mounted from multiple directions; magnetic switch slots around the body.
$122.00
-
AirTAC TN Series: Twin-rod Cylinder - TN16X200S
Bore size:φ16mm,Stroke:200mm,Acting type:Double acting,Cylinder type:Twin-rod,Standard:Enterprise standard,Magnet:With magnet,Port thread:PT threadProduct Features:1. Twin-rod cylinder with good resistance to bending and twisting moments.2. Double acting; bumper in front of the barrel adjusts stroke and relieves impact.3. Workpiece can be mounted from multiple directions; magnetic switch slots around the body.
$231.00
-
AirTAC TN Series: Twin-rod Cylinder - TN16X200ST
Bore size:φ16mm,Stroke:200mm,Acting type:Double acting,Cylinder type:Twin-rod,Standard:Enterprise standard,Magnet:With magnet,Port thread:NPT threadProduct Features:1. Twin-rod cylinder with good resistance to bending and twisting moments.2. Double acting; bumper in front of the barrel adjusts stroke and relieves impact.3. Workpiece can be mounted from multiple directions; magnetic switch slots around the body.
$231.00
-
AirTAC TN Series: Twin-rod Cylinder - TN16X200SG
Bore size:φ16mm,Stroke:200mm,Acting type:Double acting,Cylinder type:Twin-rod,Standard:Enterprise standard,Magnet:With magnet,Port thread:G threadProduct Features:1. Twin-rod cylinder with good resistance to bending and twisting moments.2. Double acting; bumper in front of the barrel adjusts stroke and relieves impact.3. Workpiece can be mounted from multiple directions; magnetic switch slots around the body.
$231.00
-
AirTAC TN Series: Twin-rod Cylinder - TN16X20S
Bore size:φ16mm,Stroke:20mm,Acting type:Double acting,Cylinder type:Twin-rod,Standard:Enterprise standard,Magnet:With magnet,Port thread:PT threadProduct Features:1. Twin-rod cylinder with good resistance to bending and twisting moments.2. Double acting; bumper in front of the barrel adjusts stroke and relieves impact.3. Workpiece can be mounted from multiple directions; magnetic switch slots around the body.
$118.00
-
AirTAC TN Series: Twin-rod Cylinder - TN16X20ST
Bore size:φ16mm,Stroke:20mm,Acting type:Double acting,Cylinder type:Twin-rod,Standard:Enterprise standard,Magnet:With magnet,Port thread:NPT threadProduct Features:1. Twin-rod cylinder with good resistance to bending and twisting moments.2. Double acting; bumper in front of the barrel adjusts stroke and relieves impact.3. Workpiece can be mounted from multiple directions; magnetic switch slots around the body.
$118.00
-
AirTAC TN Series: Twin-rod Cylinder - TN16X20SG
Bore size:φ16mm,Stroke:20mm,Acting type:Double acting,Cylinder type:Twin-rod,Standard:Enterprise standard,Magnet:With magnet,Port thread:G threadProduct Features:1. Twin-rod cylinder with good resistance to bending and twisting moments.2. Double acting; bumper in front of the barrel adjusts stroke and relieves impact.3. Workpiece can be mounted from multiple directions; magnetic switch slots around the body.
$118.00
-
AirTAC TN Series: Twin-rod Cylinder - TN16X175S
Bore size:φ16mm,Stroke:175mm,Acting type:Double acting,Cylinder type:Twin-rod,Standard:Enterprise standard,Magnet:With magnet,Port thread:PT threadProduct Features:1. Twin-rod cylinder with good resistance to bending and twisting moments.2. Double acting; bumper in front of the barrel adjusts stroke and relieves impact.3. Workpiece can be mounted from multiple directions; magnetic switch slots around the body.
$208.00
-
AirTAC TN Series: Twin-rod Cylinder - TN16X175ST
Bore size:φ16mm,Stroke:175mm,Acting type:Double acting,Cylinder type:Twin-rod,Standard:Enterprise standard,Magnet:With magnet,Port thread:NPT threadProduct Features:1. Twin-rod cylinder with good resistance to bending and twisting moments.2. Double acting; bumper in front of the barrel adjusts stroke and relieves impact.3. Workpiece can be mounted from multiple directions; magnetic switch slots around the body.
$208.00
-
AirTAC TN Series: Twin-rod Cylinder - TN16X175SG
Bore size:φ16mm,Stroke:175mm,Acting type:Double acting,Cylinder type:Twin-rod,Standard:Enterprise standard,Magnet:With magnet,Port thread:G threadProduct Features:1. Twin-rod cylinder with good resistance to bending and twisting moments.2. Double acting; bumper in front of the barrel adjusts stroke and relieves impact.3. Workpiece can be mounted from multiple directions; magnetic switch slots around the body.
$208.00
-
AirTAC TN Series: Twin-rod Cylinder - TN16X150S
Bore size:φ16mm,Stroke:150mm,Acting type:Double acting,Cylinder type:Twin-rod,Standard:Enterprise standard,Magnet:With magnet,Port thread:PT threadProduct Features:1. Twin-rod cylinder with good resistance to bending and twisting moments.2. Double acting; bumper in front of the barrel adjusts stroke and relieves impact.3. Workpiece can be mounted from multiple directions; magnetic switch slots around the body.
$191.00
-
AirTAC TN Series: Twin-rod Cylinder - TN16X150ST
Bore size:φ16mm,Stroke:150mm,Acting type:Double acting,Cylinder type:Twin-rod,Standard:Enterprise standard,Magnet:With magnet,Port thread:NPT threadProduct Features:1. Twin-rod cylinder with good resistance to bending and twisting moments.2. Double acting; bumper in front of the barrel adjusts stroke and relieves impact.3. Workpiece can be mounted from multiple directions; magnetic switch slots around the body.
$191.00
-
AirTAC TN Series: Twin-rod Cylinder - TN16X150SG
Bore size:φ16mm,Stroke:150mm,Acting type:Double acting,Cylinder type:Twin-rod,Standard:Enterprise standard,Magnet:With magnet,Port thread:G threadProduct Features:1. Twin-rod cylinder with good resistance to bending and twisting moments.2. Double acting; bumper in front of the barrel adjusts stroke and relieves impact.3. Workpiece can be mounted from multiple directions; magnetic switch slots around the body.
$191.00
-
AirTAC TN Series: Twin-rod Cylinder - TN16X125S
Bore size:φ16mm,Stroke:125mm,Acting type:Double acting,Cylinder type:Twin-rod,Standard:Enterprise standard,Magnet:With magnet,Port thread:PT threadProduct Features:1. Twin-rod cylinder with good resistance to bending and twisting moments.2. Double acting; bumper in front of the barrel adjusts stroke and relieves impact.3. Workpiece can be mounted from multiple directions; magnetic switch slots around the body.
$174.00
-
AirTAC TN Series: Twin-rod Cylinder - TN16X125ST
Bore size:φ16mm,Stroke:125mm,Acting type:Double acting,Cylinder type:Twin-rod,Standard:Enterprise standard,Magnet:With magnet,Port thread:NPT threadProduct Features:1. Twin-rod cylinder with good resistance to bending and twisting moments.2. Double acting; bumper in front of the barrel adjusts stroke and relieves impact.3. Workpiece can be mounted from multiple directions; magnetic switch slots around the body.
$174.00
-
AirTAC TN Series: Twin-rod Cylinder - TN16X125SG
Bore size:φ16mm,Stroke:125mm,Acting type:Double acting,Cylinder type:Twin-rod,Standard:Enterprise standard,Magnet:With magnet,Port thread:G threadProduct Features:1. Twin-rod cylinder with good resistance to bending and twisting moments.2. Double acting; bumper in front of the barrel adjusts stroke and relieves impact.3. Workpiece can be mounted from multiple directions; magnetic switch slots around the body.
$174.00
-
AirTAC TN Series: Twin-rod Cylinder - TN16X100S
Bore size:φ16mm,Stroke:100mm,Acting type:Double acting,Cylinder type:Twin-rod,Standard:Enterprise standard,Magnet:With magnet,Port thread:PT threadProduct Features:1. Twin-rod cylinder with good resistance to bending and twisting moments.2. Double acting; bumper in front of the barrel adjusts stroke and relieves impact.3. Workpiece can be mounted from multiple directions; magnetic switch slots around the body.
$162.00
-
AirTAC TN Series: Twin-rod Cylinder - TN16X100ST
Bore size:φ16mm,Stroke:100mm,Acting type:Double acting,Cylinder type:Twin-rod,Standard:Enterprise standard,Magnet:With magnet,Port thread:NPT threadProduct Features:1. Twin-rod cylinder with good resistance to bending and twisting moments.2. Double acting; bumper in front of the barrel adjusts stroke and relieves impact.3. Workpiece can be mounted from multiple directions; magnetic switch slots around the body.
$162.00
-
AirTAC TN Series: Twin-rod Cylinder - TN16X100SG
Bore size:φ16mm,Stroke:100mm,Acting type:Double acting,Cylinder type:Twin-rod,Standard:Enterprise standard,Magnet:With magnet,Port thread:G threadProduct Features:1. Twin-rod cylinder with good resistance to bending and twisting moments.2. Double acting; bumper in front of the barrel adjusts stroke and relieves impact.3. Workpiece can be mounted from multiple directions; magnetic switch slots around the body.
$162.00
-
AirTAC TN Series: Twin-rod Cylinder - TN16X10S
Bore size:φ16mm,Stroke:10mm,Acting type:Double acting,Cylinder type:Twin-rod,Standard:Enterprise standard,Magnet:With magnet,Port thread:PT threadProduct Features:1. Twin-rod cylinder with good resistance to bending and twisting moments.2. Double acting; bumper in front of the barrel adjusts stroke and relieves impact.3. Workpiece can be mounted from multiple directions; magnetic switch slots around the body.
$115.00
-
AirTAC TN Series: Twin-rod Cylinder - TN16X10ST
Bore size:φ16mm,Stroke:10mm,Acting type:Double acting,Cylinder type:Twin-rod,Standard:Enterprise standard,Magnet:With magnet,Port thread:NPT threadProduct Features:1. Twin-rod cylinder with good resistance to bending and twisting moments.2. Double acting; bumper in front of the barrel adjusts stroke and relieves impact.3. Workpiece can be mounted from multiple directions; magnetic switch slots around the body.
$115.00
-
AirTAC TN Series: Twin-rod Cylinder - TN16X10SG
Bore size:φ16mm,Stroke:10mm,Acting type:Double acting,Cylinder type:Twin-rod,Standard:Enterprise standard,Magnet:With magnet,Port thread:G threadProduct Features:1. Twin-rod cylinder with good resistance to bending and twisting moments.2. Double acting; bumper in front of the barrel adjusts stroke and relieves impact.3. Workpiece can be mounted from multiple directions; magnetic switch slots around the body.
$115.00
